Threads Created By Uberpube

Threads Created \| All Posts Threads Created By Uberpube
Title	Forum	Post Time
The elusive D/W series 26x21 440 ac rad	Sandy's Truck Shop	04/19/24 02:46 AM
Truck stroker-part deux - 528	Unlawfl's Race & Engine Tech	04/13/24 03:49 PM
Thinner motor mount biscuits	Moparts Question and Answer	04/01/24 03:15 PM
Ramcharger motor went to the dyno.	Unlawfl's Race & Engine Tech	03/01/24 05:33 AM
late 70s steering column interchange question	Moparts Question and Answer	10/04/23 02:08 AM
Another Pinion angle and Perch welding question	Moparts Question and Answer	08/22/23 05:44 PM
Afr hemi heads	Gen III Hemi Tech	10/29/22 05:20 PM
Tuning the 440 , industrial style	Unlawfl's Race & Engine Tech	10/29/22 02:14 PM
Transmission controller frustration.	Moparts Question and Answer	06/13/22 08:08 PM
Engine masters max wedge episode	Unlawfl's Race & Engine Tech	05/27/22 11:33 PM
Allyn Lee, ARL Racing-Lee Brothers has passed	Unlawfl's Race & Engine Tech	04/25/22 11:51 PM
Cummins cylinder performance/porting	Unlawfl's Race & Engine Tech	04/18/22 07:08 PM
Muffler Ideas for 505.	Unlawfl's Race & Engine Tech	02/26/22 11:50 PM
Dana 60/70 maximum pinion angle?	Moparts Question and Answer	01/21/22 01:06 AM
Drilling trickflow's for A/C mount.	Unlawfl's Race & Engine Tech	09/12/21 02:55 AM
Trickflow 270 heads with promagnum rockers	Unlawfl's Race & Engine Tech	05/28/21 12:59 AM
4150 question	Unlawfl's Race & Engine Tech	05/12/21 02:06 AM
Worth doing for bronze drive gear?	Unlawfl's Race & Engine Tech	05/02/21 12:07 AM
3rd gen Cummins mprop FCA change results.	Sandy's Truck Shop	05/01/21 12:53 AM
Cometic .030 gaskets	Moparts Question and Answer	04/14/21 02:02 AM

Page 1 of 3