felpro's website = frustration! - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech felpro's website = frustration!

Print Thread

felpro's website = frustration! #971281 04/11/11 05:26 PM 04/11/11 05:26 PM
Joined: Feb 2007 Posts: 5,080 organ M maximum entropy OP master
maximum entropy OP master M Joined: Feb 2007 Posts: 5,080 organ	anybody know if the 1009 is ok to use with iron heads? for what is the good life if not doing things thoughtfully?

Re: felpro's website = frustration! [Re: maximum entropy] #971282 04/11/11 05:38 PM 04/11/11 05:38 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	Absolutely fine. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: felpro's website = frustration! [Re: CompWedgeEngines] #971283 04/11/11 05:52 PM 04/11/11 05:52 PM
Joined: Feb 2007 Posts: 5,080 organ M maximum entropy OP master
maximum entropy OP master M Joined: Feb 2007 Posts: 5,080 organ	coolthanks! i've never built a big block with iron heads! for what is the good life if not doing things thoughtfully?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1