|
Re: Titanium Valves
[Re: 90ram]
#909042
01/20/11 01:18 AM
01/20/11 01:18 AM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
master
|
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
When the valve diameter is big, and has a long stem. Like the B1 M/C stuff its a almost a must. But for most engines turning below 8K with a moderate valve size. You wasting money IMO
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: Titanium Valves
[Re: Bob_Coomer]
#909043
01/20/11 01:26 AM
01/20/11 01:26 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
When the valve diameter is big, and has a long stem. Like the B1 M/C stuff its a almost a must. But for most engines turning below 8K with a moderate valve size. You wasting money IMO
Yeah they COST... I payed $100 each for my B1M/C intake valves 2.4 dia ... I need to replace 1 that I misplaced and they want $140 for it
|
|
|
Re: Titanium Valves
[Re: Bob_Coomer]
#909045
01/20/11 12:06 PM
01/20/11 12:06 PM
|
Joined: Nov 2010
Posts: 37 usa
90ram
OP
member
|
OP
member
Joined: Nov 2010
Posts: 37
usa
|
Quote:
When the valve diameter is big, and has a long stem. Like the B1 M/C stuff its a almost a must. But for most engines turning below 8K with a moderate valve size. You wasting money IMO
I'm Using B-1 MCs on a 572, single 4, Probably will be under 8000. Maybe 7200 to 7600 peak don't know what peak will be till its dynoed. Is it worth it to do the Exhaust Valves on the B-1 MCs?
|
|
|
Re: Titanium Valves
[Re: 90ram]
#909046
01/20/11 12:13 PM
01/20/11 12:13 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Quote:
When the valve diameter is big, and has a long stem. Like the B1 M/C stuff its a almost a must. But for most engines turning below 8K with a moderate valve size. You wasting money IMO
I'm Using B-1 MCs on a 572, single 4, Probably will be under 8000. Maybe 7200 to 7600 peak don't know what peak will be till its dynoed. Is it worth it to do the Exhaust Valves on the B-1 MCs?
I was going to run just the intake tit and stainless exhaust and I planned on high rpm 9000 range but was less ci than yours
|
|
|
Re: Titanium Valves
[Re: sg66mopar]
#909048
01/20/11 12:54 PM
01/20/11 12:54 PM
|
Joined: Jan 2003
Posts: 19,361 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,361
Las Vegas
|
I have Titanium on both sides. Overkill, probably, especially for a S/ST car.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
|
|
|