Quote:

---

Yes sir, please do! I would be VERY interested in these if they will fit. Thank you very much

---

...my pleasure, heres a few more pics...hope they help. i get them to measure right at 3 inches deep(at the deepest) and 2.5 inches deep at the baffle.
and as far as them being made overseas..well i can't say for sure either way because there is no info on them anywhere.?? just nicely wrapped in a white box with no stamping of any sort, so i suppose they could be the same as pro-comp or source. but i can say that the bolt holes line up perfectly, compared to my el-cheapo set i'm using now that i paid $100 for, that i had to open every hole just to get them to line up.
also they are not just powdercoated with a MOPAR sticker on them...these covers have a textured finish and the MOPAR is actually the original surface of the cover...they masked it off before they coated them then then removed the masking...you can feel the difference.. goes from smooth to textured over the logo.
i posted these just to show that ma'MOPAR is at least trying to bring out something a little different and be more modern...and they still get bashed. ...if ya don't like them don't buy them makes no difference to me. i thought that they were cool so i bought them.
[image][/image]
[image][/image]
[image][/image]

Quote:

---

Thanks for the info Al.

Any comments on the breather ? Looks to be a "push" on style,,,as opposed to a screw on style ?

---

hi ya Doug..the breathers are push in style and they come with 2 diff grommets...1 for a breather and 1 that appears to be for a pcv.
[image][/image]

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

Quote:

---

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

No you are not the only one. They look like dog poo.

---

I wouldn't say that just not my bag

Quote:

---

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

No you are not the only one. They look like dog poo.

---

...hey thanks for bringing... maturity,knowledge and taste to my thread.. ..i'm not sure how much longer the thread would have lasted without your professional insight into dog poo...i'm assuming you are a professional in this area or why else would you comment.? you surely have had dog pooo in your hands before and must obviuosly know dog poo when you hold it...oh wait you've never even had these covers in your hand so you must be going on looks alone..whata guy. ..you just couldn't help yourself could you..just had to jump in and make some childish remark..a couple of people that i know, that have built there own cars with a fair amount of attention to detail, think these covers are pretty nice..1 being Johnny Johnson(big beep) and 2 me...if you don't like them thats fine but why post that comment..

Quote:

---

Quote:

---

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

No you are not the only one. They look like dog poo.

---

...hey thanks for bringing... maturity,knowledge and taste to my thread.. ..i'm not sure how much longer the thread would have lasted without your professional insight into dog poo...i'm assuming you are a professional in this area or why else would you comment.? you surely have had dog pooo in your hands before and must obviuosly know dog poo when you hold it...oh wait you've never even had these covers in your hand so you must be going on looks alone..whata guy. ..you just couldn't help yourself could you..just had to jump in and make some childish remark..a couple of people that i know, that have built there own cars with a fair amount of attention to detail, think these covers are pretty nice..1 being Johnny Johnson(big beep) and 2 me...if you don't like them thats fine but why post that comment..

---

Good grief, relax. Its just an opinion, its also just a valve cover. Its also a discussion forum where opinions are discussed. Dont take it so personally.

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

Dont care if they are sold by Mopar or not....you can even tell by the hardware they are the SAME 'ole Chinese valvecovers that have been sold for awhile.

Quote:

---

Quote:

---

Quote:

---

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

No you are not the only one. They look like dog poo.

---

...hey thanks for bringing... maturity,knowledge and taste to my thread.. ..i'm not sure how much longer the thread would have lasted without your professional insight into dog poo...i'm assuming you are a professional in this area or why else would you comment.? you surely have had dog pooo in your hands before and must obviuosly know dog poo when you hold it...oh wait you've never even had these covers in your hand so you must be going on looks alone..whata guy. ..you just couldn't help yourself could you..just had to jump in and make some childish remark..a couple of people that i know, that have built there own cars with a fair amount of attention to detail, think these covers are pretty nice..1 being Johnny Johnson(big beep) and 2 me...if you don't like them thats fine but why post that comment..

---

Good grief, relax. Its just an opinion, its also just a valve cover. Its also a discussion forum where opinions are discussed. Dont take it so personally.

---

Very true it is a discussion forum. However you could politely voice your opinion with bashing the guys stuff instead of being plain rude about it.

Quote:

---

Quote:

---

Quote:

---

Quote:

---

Quote:

---

guess I am the only one who is not in love with them looks like cheap chinese fab covers with a powder coating and a mopar graph on them.

---

No you are not the only one. They look like dog poo.

---

...hey thanks for bringing... maturity,knowledge and taste to my thread.. ..i'm not sure how much longer the thread would have lasted without your professional insight into dog poo...i'm assuming you are a professional in this area or why else would you comment.? you surely have had dog pooo in your hands before and must obviuosly know dog poo when you hold it...oh wait you've never even had these covers in your hand so you must be going on looks alone..whata guy. ..you just couldn't help yourself could you..just had to jump in and make some childish remark..a couple of people that i know, that have built there own cars with a fair amount of attention to detail, think these covers are pretty nice..1 being Johnny Johnson(big beep) and 2 me...if you don't like them thats fine but why post that comment..

---

Good grief, relax. Its just an opinion, its also just a valve cover. Its also a discussion forum where opinions are discussed. Dont take it so personally.

---

Very true it is a discussion forum. However you could politely voice your opinion with bashing the guys stuff instead of being plain rude about it.

---

Quote:

---

Here ya go....same 'ole same 'ole. $90 shipped on ebay...made in China

---

Quote:

---

Quote:

---

Here ya go....same 'ole same 'ole. $90 shipped on ebay...made in China

---

...no where in any of my post did i say that theses were NOT made in china, i said that there were no markings on anything that i could confirm where they were made..i did mention that they seem to fit better than my $100 set i had..and that was my only comparision..ALL i was trying to do, is give people a chance to see some new MP products, and maybe give them a heads up on alot of people in getting a set, if they so desired. i highly doubt that i'll ever start another thread like this one or any other for that matter...the constant hating and piling on that goes on here is stupid and i'll have little to no part of it. look at my post history..i've tried to help numerous members with MP parts and OEM parts help..but not anymore not after this crap..i'll keep to myself and send pm's to the members here who i have helped in the past, or visa-versa.

HAPPY NEW YEAR

---

oh knock it off, not everyone will like what MP has to offer these days. we thank you for posting but be ready for different opinions. if you can't handle that take your ball and run. again thank you and Happy New year. we hope you stick around and grow some thicker skin