|
Re: UNSURE What To Do
[Re: Jeremiah]
#865574
11/28/10 04:29 PM
11/28/10 04:29 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Dumb question, but would turning the hat on the blower towards the windshield help in a ran storm?
In terms of reliability, adding the blower also gives you several more points of failure. Would you run any electronics to reference the timing curve to the boost or keep it simple and set the timing like normal? Also, I am going to assume the huffer would require two carbs and the N/A setup would be a Dominator?
I thought about doing something like the turned around
hat(actually I was thinking a clamp on unit with a
couple of sweep back inlets aiming back and down)
to separate the rain and air.... right at the moment
I am leaning towards the N/A BUT I sure would like
to see the blower on it..... plus if I went blower
I would have to cut one of my old W-5 tunnel rams
to make the intake
|
|
|
Re: UNSURE What To Do
[Re: emarine01]
#865575
11/28/10 04:29 PM
11/28/10 04:29 PM
|
Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
tubtar
master
|
master
Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
|
But there is always something to be said for a large belt driven accessory hanging out of the hood.  Tactical or practical ? Show or Go ? Being the coolest looking car being driven on the trailer after the first round is no kind of fun. I know .......... daily driver etc. I'd go with N/A and a single four barrel , but I do love the look of a big ol' huffer hanging out in the breeze.
|
|
|
Re: UNSURE What To Do
[Re: blownzoom440]
#865577
11/28/10 09:54 PM
11/28/10 09:54 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
from blower base to top of carbs is 13".i am not sure how low you can cut the TR intake.it would be interesting to see how you would do the build on boost.have you no interest in a blowthru?
I thought about going twin turbo but the 2 I have are
too small for a 408ci.... I decided I'll just go N/A and
try to keep the cowl scoop low for the street
driving... I know my scoop on the race car is a pain
in the butt driving in the pits
|
|
|
Re: UNSURE What To Do
[Re: dartman366]
#865580
11/28/10 10:17 PM
11/28/10 10:17 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Mike, I would leave it NA, I am quite sure with the proper selection of part's you can build a combo that will do exactly what you want. 
Really all I need is 525 hp if I come in at 2800#
but I would like to make some nice torque
|
|
|
Re: UNSURE What To Do
[Re: topside]
#865582
11/28/10 10:52 PM
11/28/10 10:52 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
For whatever my opinion is worth, blowers to me always belonged on Gassers or Fuel cars; on street cars especially they look too blingy ("Lookatme, lookatme!").
The less blingy a fast car is, the more impressive it is to me, and a 10.80 Rampage is plenty cool in its own right.
I would think if you underdrive a blower, a reasonable CR would be less of a problem, if you want to play with it later.
If I did go with the blower it would have been under
driven 5%... yeah I wanted something different but
its also something to look around all the time and
that does become a problem on the street but they
sure look cool... so I'm going N/A just to make
it simple... with 525 hp it should run 10.0 so I
can detune it or run a mech throttle stop for the
10.80 but with the rules I will only need to run
about 10.95 during the week and then the last day they
subtract .1 from the weekly average so I would have
enough left in it to pick up the pace
|
|
|
Re: UNSURE What To Do
[Re: MR_P_BODY]
#865583
11/28/10 11:13 PM
11/28/10 11:13 PM
|
Joined: Dec 2006
Posts: 972
alabama
mopars rule
mopar addict
|
mopar addict
Joined: Dec 2006
Posts: 972
alabama
|
Mr. P, don't forget pictures and/or video when you get it finished. I'm sure a lot of people here would like to see the finished product.
Last edited by mopars rule; 11/28/10 11:14 PM.
|
|
|
Re: UNSURE What To Do
[Re: mopars rule]
#865584
11/28/10 11:24 PM
11/28/10 11:24 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Mr. P, don't forget pictures and/or video when you get it finished. I'm sure a lot of people here would like to see the finished product.
Yeah the wife has been taking pics as I go along...
being that I was hunting for the last month I didnt
get anything done... I'm still in the cut it apart
process but should start the chassis in a couple weeks
|
|
|
|
|
