Anyone Using This Timing Gear Set - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Anyone Using This Timing Gear Set

Print Thread

Anyone Using This Timing Gear Set #859259 11/21/10 01:49 PM 11/21/10 01:49 PM
Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,... The Cuda Guy OP enthusiast
The Cuda Guy OP enthusiast Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,...	http://www.prwonlinestore.com/dualgeardrive-mopar2.aspx Are these that much better than a doubble roller. Application RB 493 ci Alum Heads est. 550-600hp Thanks guys. Don Street/Strip 73 Barracuda

Re: Anyone Using This Timing Gear Set [Re: The Cuda Guy] #859260 11/21/10 02:21 PM 11/21/10 02:21 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	Double Roller would be better..... set ups like that are know for not keeping time

Re: Anyone Using This Timing Gear Set [Re: The Cuda Guy] #859261 11/21/10 02:23 PM 11/21/10 02:23 PM
Joined: Sep 2009 Posts: 257 madison, ohio modified1090 enthusiast
modified1090 enthusiast Joined: Sep 2009 Posts: 257 madison, ohio	often reffered to as the poor mans blower. they are noisy! fwiw i don't have any real hand experience with them myself but have heard that they are hard on camshafts due to the harmonics transfer. i have always bought the summit brand double roller for mine and never had a problem

Re: Anyone Using This Timing Gear Set [Re: modified1090] #859262 11/21/10 02:41 PM 11/21/10 02:41 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al master
Mopar-Al master Joined: Jun 2004 Posts: 6,780 Alabama	just send money

Re: Anyone Using This Timing Gear Set [Re: The Cuda Guy] #859263 11/21/10 03:19 PM 11/21/10 03:19 PM
Joined: Jan 2003 Posts: 21,073 Niles , Ohio T therocks oh wait.but hey.lets see.oh yeah.
therocks oh wait.but hey.lets see.oh yeah. T Joined: Jan 2003 Posts: 21,073 Niles , Ohio	I dont know about that one.My kid has a Pete Jackson gear drive in his 62 413.Been in at least 10 years street/strip and no problems at all.His timing is rock solid.Rocky Chrysler Firepower

Re: Anyone Using This Timing Gear Set [Re: therocks] #859264 11/21/10 04:49 PM 11/21/10 04:49 PM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® pro stock
Keith Black® pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	aparently the dual idlers have problems. go with the milodon. (hard to believe that you can have timing issues with a gear drive they're solid!) -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Anyone Using This Timing Gear Set [Re: The Cuda Guy] #859265 11/21/10 05:00 PM 11/21/10 05:00 PM
Joined: Jun 2004 Posts: 1,226 Peoples republic of clackamas ... A atoetly pro stock
atoetly pro stock A Joined: Jun 2004 Posts: 1,226 Peoples republic of clackamas ...	I've been running one of these from jegs so far so good. And it is not as noisey as I thought it would be. http://www.jegs.com/i/JEGS/555/20361/10002/-1 6312980-mopar20102.jpg (116 downloads)

Re: Anyone Using This Timing Gear Set [Re: joshking440] #859266 11/21/10 05:10 PM 11/21/10 05:10 PM
Joined: Feb 2005 Posts: 28,312 Cincinnati, Ohio Challenger 1 Too Many Posts
Challenger 1 Too Many Posts Joined: Feb 2005 Posts: 28,312 Cincinnati, Ohio	Quote: Double Roller would be better..... set ups like that are know for not keeping time

Re: Anyone Using This Timing Gear Set [Re: Challenger 1] #859267 11/21/10 05:19 PM 11/21/10 05:19 PM
Joined: Feb 2003 Posts: 2,560 S.E. Michigan cl440 master
cl440 master Joined: Feb 2003 Posts: 2,560 S.E. Michigan	Not sure the brand but I know 3 of these that were all installed in BB Mopars about the same time and all 3 broke! I do not trust them at all. Not sure what happened or why they came apart but these were in race engines running solid flat tappet cams and all were installed by the same reputable builder. We have always ran a double roller chain and have never had an issue! Hard to beat a good chain setup for reliability and value IMO. 6313006-7434_1126379884042_1363524361_298887_744769_n.jpg (48 downloads)

Re: Anyone Using This Timing Gear Set [Re: cl440] #859268 11/21/10 07:20 PM 11/21/10 07:20 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: Not sure the brand but I know 3 of these that were all installed in BB Mopars about the same time and all 3 broke! I do not trust them at all. Not sure what happened or why they came apart but these were in race engines running solid flat tappet cams and all were installed by the same reputable builder. We have always ran a double roller chain and have never had an issue! Hard to beat a good chain setup for reliability and value IMO. Have seen 3 Pete Jacksons break at the link bars and will never use anything similar again.All 3 were on Hemis. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Anyone Using This Timing Gear Set [Re: B G Racing] #859269 11/22/10 02:15 AM 11/22/10 02:15 AM
Joined: Apr 2007 Posts: 1,165 Central Ohio, USA Bigbeep super stock
Bigbeep super stock Joined: Apr 2007 Posts: 1,165 Central Ohio, USA	Quote: Quote: Not sure the brand but I know 3 of these that were all installed in BB Mopars about the same time and all 3 broke! I do not trust them at all. Not sure what happened or why they came apart but these were in race engines running solid flat tappet cams and all were installed by the same reputable builder. We have always ran a double roller chain and have never had an issue! Hard to beat a good chain setup for reliability and value IMO. Have seen 3 Pete Jacksons break at the link bars and will never use anything similar again.All 3 were on Hemis. Sounds like enough reason to me to stay away from it! Cloyes true roller Beep

Re: Anyone Using This Timing Gear Set [Re: Bigbeep] #859270 11/22/10 04:22 AM 11/22/10 04:22 AM
Joined: Jan 2003 Posts: 3,943 Melbourne.....Oz-land Moparmal master
Moparmal master Joined: Jan 2003 Posts: 3,943 Melbourne.....Oz-land	Rollmaster is better - they use an IWIS chain under license - by far the strongest chain on the market

Re: Anyone Using This Timing Gear Set [Re: Mopar-Al] #859271 11/22/10 04:46 AM 11/22/10 04:46 AM
Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,... The Cuda Guy OP enthusiast
The Cuda Guy OP enthusiast Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,...	Quote: just send money LOL!!! Roger that, you know I will. Don Street/Strip 73 Barracuda

Re: Anyone Using This Timing Gear Set [Re: The Cuda Guy] #859272 11/22/10 06:35 AM 11/22/10 06:35 AM
Joined: Feb 2007 Posts: 6,295 U.S. M moparniac master
moparniac master M Joined: Feb 2007 Posts: 6,295 U.S.	I run a milodon gd now but also ran the Pete Jackson noisy with no problems! Welcome to the performance world where anything can happen! I just hate it when a vendor sends you junk from the start Mopar Performance

Re: Anyone Using This Timing Gear Set [Re: moparniac] #859273 11/22/10 09:02 AM 11/22/10 09:02 AM
Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,... The Cuda Guy OP enthusiast
The Cuda Guy OP enthusiast Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,...	Quote: I run a milodon gd now but also ran the Pete Jackson noisy with no problems! Welcome to the performance world where anything can happen! I just hate it when a vendor sends you junk from the start You know me bro, I use moparts as a sounding board when I get "great ideas" from the "good idea fairy" as Alan puts it LOL!!! Im sure it drives him nuts to see all these posts LOL!!! Thanks to the members who provided feedback on this part set. Don Street/Strip 73 Barracuda

Re: Anyone Using This Timing Gear Set [Re: The Cuda Guy] #859274 11/22/10 11:43 PM 11/22/10 11:43 PM
Joined: Aug 2005 Posts: 761 KY J juicedcuda super stock
juicedcuda super stock J Joined: Aug 2005 Posts: 761 KY	I always run the comp cams double roller with the billet gears and never had a problem! 1970 Plymouth 'Cuda 1970 Plum Crazy "Gold Duster" 1973 Gold Duster

Re: Anyone Using This Timing Gear Set [Re: juicedcuda] #859275 11/23/10 11:30 PM 11/23/10 11:30 PM
Joined: Feb 2008 Posts: 2,648 GA Boosted master
Boosted master Joined: Feb 2008 Posts: 2,648 GA	have one on my 512... no issues so far and ran one ont he old Chally with the 451 and never an issue.. Both cars are street cars though.. 2011 RAM3500 1967 Fastback Barracuda with some go fast goodies.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1