Thread problem w/ rod bolts - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Thread problem w/ rod bolts

Print Thread

Thread problem w/ rod bolts #83192 07/02/08 08:05 PM 07/02/08 08:05 PM
Joined: Jun 2007 Posts: 764 Prescott Az 73 SSP OP super stock
73 SSP OP super stock Joined: Jun 2007 Posts: 764 Prescott Az	I have eagle rods w/ ARP rod bolts. The question is can I clean the threads w/ a die? I am having problems putting the nuts on some of the bolts. They act like the threads are slightly damaged by threading on real hard.

Re: Thread problem w/ rod bolts [Re: 73 SSP] #83193 07/02/08 08:16 PM 07/02/08 08:16 PM
Joined: Nov 2004 Posts: 5,118 Alone in the darkness gamagoat6x6 super street
gamagoat6x6 super street Joined: Nov 2004 Posts: 5,118 Alone in the darkness	NO. Those threads are roll formed and using a die will cut the grain in the metal. If you`re worried about `em get a new set. Rod bolts is the last place you want to scrimp out. `02 RAM2500 SPORT V10 4x4 `06 GMC sierra NO cars

Re: Thread problem w/ rod bolts [Re: gamagoat6x6] #83194 07/02/08 10:41 PM 07/02/08 10:41 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Quote: NO. Those threads are roll formed and using a die will cut the grain in the metal. If you`re worried about `em get a new set. Rod bolts is the last place you want to scrimp out. Wrong place to cut corners...

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1