is there any reason i couldn't use the trans cooler for an engine oil cooler?

as long as you got the lines to handle the oil pressure at the hook ups

dont see why not

I look for them on the cop car dippys/furys with sb to rob the line hook ups and cooler

you have got me to looking at adding it to my 440 now...

thanks..

oh..got me to wanting the 413 like yous down the road for the odd ball look under the hood now

that can go in my stepside when the 440 trucks done

keep us post on it and how you do it

need some pics of the hook ups

Post deleted by moparmanof85

for the record, when i did it to the 318, i put 2 drain rails in. under each valve cover. they were extra tall

would the sb block be the same open leak and drop the oil pressure also?

seen the same #LBS on the gauge with and with out the cooler on my sb cop motor swap

it went fom the galley right straight up from the pump to dump right back in thru the hollow FP bolt

unless the small hole was the restriction to hold pressure up