440 head gasket - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440 head gasket

Print Thread

440 head gasket #770644 08/10/10 12:34 PM 08/10/10 12:34 PM
Joined: Jul 2010 Posts: 49 mogadore ohio 44260 R racingblues1426 OP member
racingblues1426 OP member R Joined: Jul 2010 Posts: 49 mogadore ohio 44260	Could someone give me a part number for a head gasket to fit a wedge with a 4.350 bore. I need a 055 to 060 gasket. Thanks

Re: 440 head gasket [Re: racingblues1426] #770645 08/10/10 12:47 PM 08/10/10 12:47 PM
Joined: Oct 2007 Posts: 535 Ohio racerAL mopar
racerAL mopar Joined: Oct 2007 Posts: 535 Ohio	try these guys..http://www.scegaskets.com/.. -1967 Plymouth Satellite #3555 446 cid on E-85 best 1/4 et 10.577 @ 127.58 best 1/8 et 6.722 @ 100.68 best 60ft. 1.419

Re: 440 head gasket [Re: racingblues1426] #770646 08/10/10 02:43 PM 08/10/10 02:43 PM
Joined: Jan 2003 Posts: 31,050 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,050 Oregon	Not a lot of gaskets that thick on the shelf. Cometic can make them but I don't think they have a stocking part number that thick. The FelPro race gaskets are that thick but are designed for larger bore sizes.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1