727 builder: thanks for the info!

Every couple days I look through this thread and it keeps getting harder to find. So

good looking truck

17s

I talked to the guy who owns JD Wheel at the spring nostalga show at National Trail last year. Seemed like a decent guy. I'm very fond of the Rev line he sells. There very nicely priced too.

here's mine cut front springs , spring under axle 295/50 on the back and I actually want taller tires thinking of 275bfgoodrich t/a

Great job everyone beautiful trucks! But you guys talked me into it. I have a 78 d150 gonna get a c body 8 3/4 over ths springs so what else can I do to just really slam the wheels into the fenders. The fronts have to be able to then decent at the strip but other than that i'm not worried about clearances since it will not be hitting the oh [Edited by Moparts - Family Friendly Site - Keep it clean] bumps. I'm running 275/60/15s in the rear right now and 235/60/15s up front eventually goin smaller in the front and bigger in the rear. I haven't found the posts about lowering the front yet and what's required to do it. any suggestions help just don't wanna spend an arm and leg right now.
Brad

Search KevinI's post also Rumblebee theres more just cant think of them.

You can get Dakota lowering spindles or van lower control arms or shorter front coils or cut your coils. Also pair a couple together ang get lower.
Heres a pic with cut coils

Just put a 8-3/4 3:91 posh in on top of the springs. Still have to do the front. Think I'm gonna just cut the coils and see how it looks.

Hope I can get the same look as some of y'alls trucks!!!

before

my I like the before shot. but nice truck either way. Love those rims what kind are they?

The rims use to be called Gamblers. You see them on jeeps a lot but they made them to fit other makes

just to keep it going.