I don't have any yet.but I know you guys have them,lets see them

sneak peak

last for now.

Ok , Here is my project. When funds get better I can start back on it but for now it's just pipe dreams....

440 pump gas s480.

Here's some engine spec's
9" deck 48*
R3 4.127 bore
W9 heads
Je dished piston's
Carrillo 6.200 rods
Jesel Dogbone .927 rollers with a .850 wheel

Here's my crank, It's a LA enterprises 3.37 stroke Billet out of one of the 24hrs of Le Mans LMP prototypes.

I'm stuck in Owensborro KY this week working....when I get back I'll get some new pics of my "upgraded" turbo setup.

This is my play toy, The Fwd turbo cars make for a good learning tool . It has a Holset HX35 turbo making 20lbs right now. I need more fuel to turn it up! Oh yea, A better clutch also!

The promod turbos are killer but I think the mounting points to hang them are inconvenient, I hung mine from the body.

Here is my junk

78 D-150 Adventurer 360 x headed 8:1 comp m-1 intake blow through 750 carb(home brewed) Borg Warner S475 w/1.10 exh, 4inch single exhaust..83/4 w 3.23's
Best et on 8psi pump gas on BFG drag radials
-11.08@125 w/2.20 60ft

This is the setup before i put it in the truck 2years ago...it has been through many changes over the last 5 years and several different turbo's and exhaust manifold setups. right now im swaping cams and putting a cage in the truck

My mock up pics a few months back. Should have some completed pics and do some testing in 3-4 weeks if the weather will break.

And the truck

Must be bad a$$ if you have to were a helmet just to sit on the trailer ..

Yup must be...sorry it was the only pic i had of the truck on my new computer. didnt know this was going to be a trash talking forum i can that route if you like smart a$$

We have two of these:



With this engine:



Turbo/intercooled with a five speed. I won't mess with turbos on the old stuff.