Re: 383 to 440(69 superbee)
[Re: 1hirschdalemopar]
#604264
02/04/10 10:00 PM
02/04/10 10:00 PM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
Quote:
I am going to a 440 with a performer rpm intake and I was wondering if it would fit with the ramcharger hood and air cleaner set up?I want to keep the motor as stock looking as possible,and I will be running a holley 850.Thanks
pretty sure your going to have a little issue.....with the carb....
|
|
|
Re: 383 to 440(69 superbee)
[Re: repad]
#604268
02/04/10 10:30 PM
02/04/10 10:30 PM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
I am going to run into the same issue..have not crossed that bridge yet..gonna run the 383 I have until the 440 is done....
I am 100% sure I will deff need to change intake..LOL
Last edited by 70CoronetR/T; 02/04/10 10:37 PM.
|
|
|
Re: 383 to 440(69 superbee)
[Re: 1hirschdalemopar]
#604270
02/04/10 10:36 PM
02/04/10 10:36 PM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
Quote:
Thanks for the replies,that a real bummer because I really want to run that set up,but maybe I will try for a modified air cleaner base or I may just have to come up with a different intake that performes close to the rpm intake.Any ideas on a different intake?
I intend to mock up stock application then do some simple math....
prob going to leave off air box..until later date....
|
|
|
Re: 383 to 440(69 superbee)
[Re: Dougsmopars]
#604273
02/04/10 10:49 PM
02/04/10 10:49 PM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
Quote:
I'm not sure but i beleive the air cleaner for the 440 cars is different from 383 cars. Lower profile. Look into that. Check your air cleaner against your brothers.
yes it is..the 440 one is shorter.. been there done that.....
|
|
|
Re: 383 to 440(69 superbee)
[Re: 1hirschdalemopar]
#604278
02/06/10 01:03 AM
02/06/10 01:03 AM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
the 440 decks are going to be ~.745" (3/4") taller than your 383 out at a 45 angle which will translate to less than 3/4" of a vertical height change. The street dominator is a tried & true intake and might not be the perfect intake for your app (I am not sure) but yes it is a (very) low profile piece and I dont think it would hurt you in your app.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: 383 to 440(69 superbee)
[Re: 1hirschdalemopar]
#604280
02/06/10 01:37 AM
02/06/10 01:37 AM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
this is my low deck street dominator that's going on my 451. EDIT 20 yrs ago nationally known Mopar racer Bill Bagshaw made 511 horsepower w a 30 over 440 w 6 pack (2355) pistons (9.5:1 CR) HOME ported 906 heads w the MP 2.08/1.74 templates (plastic sheet patterns were cut out larger), a box stock 750 (4779) holley dp and you guessed it a street dominator intake . You're not gonna be makin more than 511 are you
Last edited by RapidRobert; 02/06/10 02:03 AM.
live every 24 hour block of time like it's your last day on earth
|
|
|
|
|