50 truck hot rod project
#599978
01/31/10 06:30 PM
01/31/10 06:30 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
What's the cheapest way to lower the front of the 85 coil spring chassis? Some say cut others say heat. what's the cheapest and best method? How is it done?
Last edited by 4bbl; 02/28/10 11:22 AM.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: poorboy]
#599981
01/31/10 10:59 PM
01/31/10 10:59 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Nice looking 4x4. You're right the front wheel opennings are going to be changed quite a bit, but that's the plan.
Last edited by 4bbl; 02/27/10 09:27 AM.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599982
02/07/10 12:03 AM
02/07/10 12:03 AM
|
Joined: Jan 2003
Posts: 1,967 ID/MT
Cheeto
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,967
ID/MT
|
Mustang offset wheels may fit those tires inside the wheelwells. Just be sure you have the room between the tire and frame/suspension.
If you're going cheap on the springs then I vote for cutting . Do it with a chop saw or cutoff wheel though to minimize the amount of heat you put into the coil.
Cheeto It's not perfect. It's not correct. It's not yours!
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: Cheeto]
#599983
02/21/10 09:41 PM
02/21/10 09:41 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
fire wall in now. about off to the blaster
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: poorboy]
#599985
02/22/10 10:11 PM
02/22/10 10:11 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
new pic of fire wall. sorry , just started with pictures
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: fstfish66]
#599987
02/23/10 09:10 AM
02/23/10 09:10 AM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Thanks, I noticed something though. I need to reconstruct the drip rail in the upper middle of the fire wall. I don't want to get the distributor wet when I wash the thing.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: poorboy]
#599989
02/23/10 11:09 PM
02/23/10 11:09 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Here is another look during construction to give a better idea of depth at the top. Things tapper back to clear the 727 bell area. I plan on a small center hump, with drink tray kind of stuff. I kepth the cab body back and hope to sneak the front wheel openings forward as far as possible with out looking wierd, but as you see, that,s a ways off yet.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599990
02/25/10 11:11 PM
02/25/10 11:11 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Snow is too deep to get it out the door but ready for the blaster after a little de-greasing. 85 chassis, shortened 22.5 inches (took the "z" out and rear axle over the springs with 2" lower blocks
Last edited by 4bbl; 02/25/10 11:12 PM.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599991
02/28/10 12:38 AM
02/28/10 12:38 AM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Chassis ready to go to the media blaster, back to work on the cab so it can go when we pick the chassis up. See where 22.5 inches cut out,and boxed area.
Last edited by 4bbl; 02/28/10 12:45 AM.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599992
03/07/10 02:44 PM
03/07/10 02:44 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
spring hanger pic, chassis is gone to blaster. Should be painted and motor back in by next weekend
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599993
03/07/10 04:32 PM
03/07/10 04:32 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
drip rail is completed. Should keep things dry now
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599994
03/07/10 05:31 PM
03/07/10 05:31 PM
|
Joined: May 2003
Posts: 15,487 Florida
scratchnfotraction
I Live Here
|
I Live Here
Joined: May 2003
Posts: 15,487
Florida
|
on a stock 85 truck with the axle floped,that rear rubber stop is gonna be real close to the axle tube makes a 5-150 almost scrap like that,but may not with yous..depends on the wieght the flip flop and pocketed/short spring is the best ride for the 85 frame and ez to do cheaply great project,nice workmanship
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: poorboy]
#599996
03/09/10 02:39 PM
03/09/10 02:39 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
did not se the drain fitting until the other day. Good point thanks
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#599997
03/27/10 02:31 PM
03/27/10 02:31 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Cab going to media blaster
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: fstfish66]
#599999
03/30/10 09:07 PM
03/30/10 09:07 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
thx, fstfish66, should have more pictures later this week. , Having the etch primer done in the same town this week too. I have time issues so thought I had better get that done before rust came back. It will still need some work before prime/paint. Hemi orange?
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#600000
03/30/10 10:47 PM
03/30/10 10:47 PM
|
Joined: Dec 2004
Posts: 1,757 levittown pa
fstfish66
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,757
levittown pa
|
Quote:
thx, fstfish66, should have more pictures later this week. , Having the etch primer done in the same town this week too. I have time issues so thought I had better get that done before rust came back. It will still need some work before prime/paint. Hemi orange?
ORANGE?? just my opinion a nice darker color,,orange it may really stand out like a sore thumb,,,just my 2 cents,,
1966 barracuda prostreeter super charged 340(SOLD) 1940 dodge coupe 241 hemi street rod 2014 ram express hemi 4x4 dailey driver 2015 cherokee 2013 R/T classic
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: fstfish66]
#600001
04/03/10 04:05 PM
04/03/10 04:05 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
chassis back, motor in. waiting for the cab from the media blaster
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#600004
04/05/10 11:23 PM
04/05/10 11:23 PM
|
Joined: Dec 2004
Posts: 1,757 levittown pa
fstfish66
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,757
levittown pa
|
Quote:
chassis back, motor in. waiting for the cab from the media blaster
looks good,,,lets se it from the front,,,i for got what the motor is,, i can seee its a small block,,
1966 barracuda prostreeter super charged 340(SOLD) 1940 dodge coupe 241 hemi street rod 2014 ram express hemi 4x4 dailey driver 2015 cherokee 2013 R/T classic
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: fstfish66]
#600005
04/06/10 12:01 PM
04/06/10 12:01 PM
|
Joined: Jan 2003
Posts: 4,046 Minnesota
72blubird
master
|
master
Joined: Jan 2003
Posts: 4,046
Minnesota
|
It is looking good. Are you keeping the butterfly hood maybe missed that. I am curious how much did the change for the 727 effect your leg room?
What was I thinking....
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#600008
04/09/10 09:58 PM
04/09/10 09:58 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
naked cab front side. doing work before metal etch primer.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#600016
05/07/10 03:42 PM
05/07/10 03:42 PM
|
Joined: Dec 2004
Posts: 1,757 levittown pa
fstfish66
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,757
levittown pa
|
looks like its doing a wheel stand,,,,
1966 barracuda prostreeter super charged 340(SOLD) 1940 dodge coupe 241 hemi street rod 2014 ram express hemi 4x4 dailey driver 2015 cherokee 2013 R/T classic
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: fstfish66]
#600017
05/12/10 09:35 PM
05/12/10 09:35 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Finished bottom side with rocker panel guard, may do the whole fire wall? Anyway ready to bolt the dolly back on after we get the under side of the dash painted. Anybody got good easy ways to do that with out some fancy pressure feed gun? Figured I would just spray bomb it.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: poorboy]
#600019
05/14/10 07:54 AM
05/14/10 07:54 AM
|
Joined: Sep 2003
Posts: 19,464 north of coder
moparx
"Butt Crack Bob"
|
"Butt Crack Bob"
Joined: Sep 2003
Posts: 19,464
north of coder
|
Quote:
A paint gun would be nice, but a spray bomb will work too. May I suggest painting the underdash white? It really brightens things up when you need to climb under the dash to do something. Gene
gene is on the money with this tip. if white isn't quite up to your liking, a light machine grey will work well too.
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: poorboy]
#600022
05/16/10 10:14 PM
05/16/10 10:14 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Too late,I used red primer rattle can. I did read the note before I primed the rest of the inner cab, so sprayed lite gray primer under there as much as I could. Thanks for the tip.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: 50 truck on to 85 chassis, lower?
[Re: 4bbl]
#600023
06/20/10 10:25 PM
06/20/10 10:25 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Cab back on chassis, happy Father's Day.
4bbl
If you can't hear it coming what's the point.......
|
|
|
|
|