Nascar Race 4 Speed Question - Purple Stripe Gears - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Nascar Race 4 Speed Question - Purple Stripe Gears

Print Thread

Nascar Race 4 Speed Question - Purple Stripe Gears #575035 01/06/10 02:31 PM 01/06/10 02:31 PM
Joined: Jan 2003 Posts: 1,946 Olympia, Washington T tallzag OP top fuel
tallzag OP top fuel T Joined: Jan 2003 Posts: 1,946 Olympia, Washington	I just got a big lot of Nascar 4 speed parts from an old West Coast racer and got a lot of cool parts. Got a couple of aluminum cases, gears, aluminum tailshafts etc. My problem is as I was putting the stuff together I found out they were a mix of red and purple stripe gears. I need one 27 tooth second gear part number 2892636 to put one tranny together and a red stripe cluster part number 2801155 with tooth counts 16, 22, 26, and 27 to put a another one together. Anybody know a source to get the second gear and a red stripe cluster? Want to be able to put a couple of complete transmissions together. Already tried Brewer's and waiting to hear back from Passon, any other suggestions? Thanks! Looking for other NASCAR 4 speed parts if anybody has any as well. Rocket Restorations

Re: Nascar Race 4 Speed Question - Purple Stripe Gears [Re: tallzag] #575036 01/06/10 05:23 PM 01/06/10 05:23 PM
Joined: Jan 2007 Posts: 1,668 Mi,U.S.A. M mike s top fuel
mike s top fuel M Joined: Jan 2007 Posts: 1,668 Mi,U.S.A.	Liberty might have some old stuff laying around.Worth a try. Leave the gun.......take the Cannoli's....Mike

Re: Nascar Race 4 Speed Question - Purple Stripe Gears [Re: tallzag] #575037 01/06/10 09:18 PM 01/06/10 09:18 PM
Joined: Jan 2003 Posts: 6,435 Abilene, Texas F fastmark master
fastmark master F Joined: Jan 2003 Posts: 6,435 Abilene, Texas	Post the numbers on the cases for me would you. I have an alum case tranny in my AAR that I posted about last week. I would like to compare numbers. We found the case number in an old 74 Petty book, but the tailhousing casting number did not come up. My tail is a two mount housing.

Re: Nascar Race 4 Speed Question - Purple Stripe Gears [Re: fastmark] #575038 01/07/10 03:18 AM 01/07/10 03:18 AM
Joined: Jan 2003 Posts: 27,483 So Cal autoxcuda Too Many Posts
autoxcuda Too Many Posts Joined: Jan 2003 Posts: 27,483 So Cal	Quote: Post the numbers on the cases for me would you. I have an alum case tranny in my AAR that I posted about last week. I would like to compare numbers. We found the case number in an old 74 Petty book, but the tailhousing casting number did not come up. My tail is a two mount housing. Pat McKinney was in my garage about 20 minutes ago. He restored one of the #22 Alison Daytona's, one of the 71 Petty Road Runner's and is THE creator of the Joe Dirt Daytona. Actually Pat ended up rolling the fenders in my 68 Cuda. I asked him about your trans. He's never ran across a NASCAR trans that was sprayed iron to be metalic. He's is very knowledgable on his Mopar NASCAR stuff. I was showing him a few pictures of the race car shell that Dick Ross bought at Spring Fling 2003 that was "advertised" as a kit car. I was actually a 68-70 Winston Cup car from all of the little nuauces that Pat pointed oit in only 5 pictures I had. BTW, Dick Ross knew it was a Cup car when he bought it. I think he now has narrowed down the group of possible drivers. I think Dick bought the car for like under $2K. Last edited by autoxcuda; 01/07/10 03:24 AM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1