Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: bb milodon oil pump [Re: hemi-itis] #546307
12/06/09 10:46 PM
12/06/09 10:46 PM
Joined: Jun 2009
Posts: 882
ky
68roadrunner Offline OP
super stock
68roadrunner  Offline OP
super stock

Joined: Jun 2009
Posts: 882
ky
wasn't thinking about the filter, checked on my system 1 short filter, it is rated at 24gpm. so i should be good with this

Re: bb milodon oil pump [Re: hemi-itis] #546308
12/06/09 11:35 PM
12/06/09 11:35 PM
Joined: Oct 2004
Posts: 1,752
detroit area
M
moderncylinder Offline
top fuel
moderncylinder  Offline
top fuel
M

Joined: Oct 2004
Posts: 1,752
detroit area
as far as the bypass in the filter,,, it is regulated by the pressures on both sides of the filter element,,, usually if the internal pressure is 3-5lbs less than the external the bypass will open

if you have no bypass make sure your filter is huge,,, i mean huge,,, like really big,,, or else you can restrict volume and blow your motor

Re: bb milodon oil pump [Re: moderncylinder] #546309
12/08/09 05:51 PM
12/08/09 05:51 PM
Joined: Jun 2009
Posts: 882
ky
68roadrunner Offline OP
super stock
68roadrunner  Offline OP
super stock

Joined: Jun 2009
Posts: 882
ky
Quote:

as far as the bypass in the filter,,, it is regulated by the pressures on both sides of the filter element,,, usually if the internal pressure is 3-5lbs less than the external the bypass will open

if you have no bypass make sure your filter is huge,,, i mean huge,,, like really big,,, or else you can restrict volume and blow your motor





i talked to system one today. and there oil filter takes 14 lb differential to open the relief. and it only takes 1/2lb of pressure to push oil through the 45 micron screen

i am going to say if the filter is stopped up enoughto have that kind of differential, with hot oil, that the engine is already toast

Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1