750 dominator jetting? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 750 dominator jetting?

Print Thread

750 dominator jetting? #537303 11/26/09 12:47 PM 11/26/09 12:47 PM
Joined: May 2005 Posts: 136 Ontario, Canada 500ciBee OP member
500ciBee OP member Joined: May 2005 Posts: 136 Ontario, Canada	What should the stock jetting on a 750 dominator be? 1970 Super Bee prostreet. 383, SMR 727, Dana 60 4:88. Building a 512 low deck.

Re: 750 dominator jetting? [Re: 500ciBee] #537304 11/26/09 02:34 PM 11/26/09 02:34 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Stock to start with!! In Ontario we average 300 feet to 1200 feet elevation so no change needed there tracks are all 600 and change. now if it is 15 to 1 iron head maybe go up 2 to 3 sizes. 11.5 to 1 aluminum stock!!! 9 to 1 aluminum head maybe down a size or two!!

Re: 750 dominator jetting? [Re: Dodgem] #537305 11/26/09 04:19 PM 11/26/09 04:19 PM
Joined: May 2005 Posts: 136 Ontario, Canada 500ciBee OP member
500ciBee OP member Joined: May 2005 Posts: 136 Ontario, Canada	Thanks, but I'm trying to find out what the stock jetting is. I don't think 84-86 is stock. 1970 Super Bee prostreet. 383, SMR 727, Dana 60 4:88. Building a 512 low deck.

Re: 750 dominator jetting? [Re: 500ciBee] #537306 11/26/09 04:55 PM 11/26/09 04:55 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Carb number???? 80186 750 (F)70,(R)70 6.5,6.5 4500HP Mechanical - No Choke 80186-1 750 (F)70,(R)70 6.5,6.5 4500 so buy this 70's with PV and 78 or so blocked.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1