Hello, just for fun looking for some bb builds with hp manifolds. Looking for hp, ETs and combos. Just curious to see what kind of power can be made with these. THANKS

440 .030 over flat tops with 0 deck, 452 heads with exhaust side ported with .080 cut off the deck with felpro composite gaskets (i believe .029 squish) torker II edelbrock intake with 800 holley dp, 484/284 hydraulic "purple shaft" fairbanks small flash convertor 4.56 gear with a 30x9 radial slick Bone stock 68 dodge coronet with everything in it went a best of 12.70 @ 107 with HP manifolds, original h pipe mufflers and tailpipes. It wasn't real fast but i thought it was quick at the time

I am putting my GTX together with HP manifolds. It is basically a stock build of a 70 440 that I re-ringed and put a resto purple stick in. It will have a 2.5" X pipe exhaust and probably dyno-max muffs. It has a 4 speed behind it and an 8 3/4 w/ 2.76 sure-grip. It isn't running yet, so we'll see how it runs. Not going to be a drag car by any means, planning on sway bars front/rear with performance more built around handling than go-fast ability.
Travis..

Not exactly the HIGHEST performance manifold out there but it's the best that will fit in my engine bay...

This is the best build-up I've seen w/manifolds, done by AndyF.
When you click the link, go to True Tales, Stroker.

http://www.arengineering.com/articles/articleframe.html

Here ya go....