590 cam centerline - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 590 cam centerline

Print Thread

590 cam centerline #485223 10/01/09 03:17 PM 10/01/09 03:17 PM
Joined: Feb 2005 Posts: 370 Real North Cal. 6 66er OP enthusiast
66er OP enthusiast 6 Joined: Feb 2005 Posts: 370 Real North Cal.	I'm installing a 590 cam in my buddy's 470. Dose anyone know what centerline I should degree it in to?

Re: 590 cam centerline [Re: 66er] #485224 10/01/09 03:27 PM 10/01/09 03:27 PM
Joined: Oct 2007 Posts: 535 Ohio racerAL mopar
racerAL mopar Joined: Oct 2007 Posts: 535 Ohio	.590 cam has a 106 center line.. -1967 Plymouth Satellite #3555 446 cid on E-85 best 1/4 et 10.577 @ 127.58 best 1/8 et 6.722 @ 100.68 best 60ft. 1.419

Re: 590 cam centerline [Re: racerAL] #485225 10/01/09 03:36 PM 10/01/09 03:36 PM
Joined: Feb 2005 Posts: 370 Real North Cal. 6 66er OP enthusiast
66er OP enthusiast 6 Joined: Feb 2005 Posts: 370 Real North Cal.	Should I put it in staight up at 106 or advance it a little.

Re: 590 cam centerline [Re: 66er] #485226 10/01/09 03:37 PM 10/01/09 03:37 PM
Joined: Feb 2007 Posts: 5,080 organ M maximum entropy master
maximum entropy master M Joined: Feb 2007 Posts: 5,080 organ	i think the mothership wants it at 102. for what is the good life if not doing things thoughtfully?

Re: 590 cam centerline [Re: maximum entropy] #485227 10/01/09 03:41 PM 10/01/09 03:41 PM
Joined: Feb 2005 Posts: 370 Real North Cal. 6 66er OP enthusiast
66er OP enthusiast 6 Joined: Feb 2005 Posts: 370 Real North Cal.	Thanks guys!

Re: 590 cam centerline [Re: 66er] #485228 10/01/09 04:04 PM 10/01/09 04:04 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	We ran my buddys' at 99.5 but it was 9.9 compression with aluminum heads and 4000 stall. he milled the heads this year to 10.9 compression and we put the cam at 101 he says it sounds great have not heard it yet!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1