PM's on the way for the quotes!

Quote:

---

Any plans for a 70 Charger front bumper? I doubt it, but figured I'd ask.

---

Hey Rick,

Hadn't heard anything on those, but let me check and find out for sure!

Jeff

Nope, no plans on the 70 charger front bumpers.

So what's in the pipes from AMD this year?
What can we expect? Anything new? time frames?

My votes:

1) 71-74 charger Bulge Hood
2) 70 Coronet Full OEM quarter panels
3) 73-74 Charger full OEM quarter panels


Thanks

Hi,

No dice on those 3. Sorry

They're talking about 66-67 B body quarters, and we're probably looking at a partial in about a year (best case).

No plans on the 73-4 charger quarters. There are some 73-4 RR partials in the works (probably 6-8 months out).

The 71-4 charger bulge hood is on hold with the door skins.

Lots of A body stuff in the works. The roof still looks like its in the plan for darts. Frame rails and tbar xmembers.

Fender patches are expected this year. Most of what's coming out is what's been shown with the last catalog update like the fender patches (or even the catalog before that in the case of the E body fenders).

66-70 B and E body front frame rails are getting close (B's are approved and E's are just about there).

All A/B/E body door hinges were approved for production, so those should be out soon.

Challenger fenders were finally approved! Looking at 90 days there.

Many variations of BB/SB valve covers will be sneaking out here shortly as well.

Can you get me a price for a set of 70 challenger fenders along with a front valance shipped to 79764.
Thanks...chris

PM on the way. Thanks!

Almost afraid to say it, but I've been told the challenger valance with the exh cutouts was approved! Expected in 2 months now. The non-tip version was approved back in Oct, but nothing was run on those until the tip version was finished up.

shot me a price on 72 road runner upper and lower rad support and lower front valance shipped to 10306

Thanks
Kevin

Do they (or anyone) make 71 Charger FRONT partial quarters?

PM on the way Kevin!

As far as the front partial quarters, AMD only did the 71-2 RR. No plans for others done that way. I haven't seen that out there for 71 chargers.

i need pricing on: AMD SHEET METAL
70 superbee,
Full quarters, or the 1/2 quarters you sell
full floor, full trunk, kickdowns
toe boards, rear tray, under rear window area,

71 challenger n96
FULL cowl,( upper top, 2 sides, firewall,) rockers, roof, full 1/4s, front frame rails, inner/outer wheel tubs, and front engine compartment inner fenders, full floors, front to back, and trunk pan, and kickdowns. taillight piece, deck lid. shaker hood

and anything else you may think i'll need.

best pricing gets my business, ( i have 4 challengers, 2 chargers and a few RR and superbees, that all need sheet metal)




jc ohio 43123

Some followup questions sent via PM for ya!

Thanks!
Jeff

Looks like the Duster front bumpers have finally arrived at AMD!!

Speaking of bumpers, Front/Rear sets for '70 RR's are now in stock and the rear 68/9 Coronet bumpers have arrived. Fronts for those due in soon.

Does amd have a date on full doors for challenegrs?

Offhand, I don't know. Let me find out and I'll get back with ya!

[Update] - sounds like the full E body door project has been stopped due to what the demand is looking like...

Ok,
Its a new year! I noticed that you stated alot of A body stuff in the works..... How about those lower side trunk/1/4 extensions and rear 1/4 patches for the 67-9 Barracudas???? Please tell me they are coming!! I think you told me something like spring 2011..
Thanks,
Robert