Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: conv71]
#343497
09/29/09 09:37 PM
09/29/09 09:37 PM
|
Joined: Nov 2004
Posts: 7,647 Houston Texas
PAINT IT BLACK
OP
Got a CHIP on my shoulder
|
OP
Got a CHIP on my shoulder
Joined: Nov 2004
Posts: 7,647
Houston Texas
|
Quote:
is it an orig black car???
No, originally B5.
|
|
|
Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: RUNCHARGER]
#343498
09/29/09 09:39 PM
09/29/09 09:39 PM
|
Joined: Nov 2004
Posts: 7,647 Houston Texas
PAINT IT BLACK
OP
Got a CHIP on my shoulder
|
OP
Got a CHIP on my shoulder
Joined: Nov 2004
Posts: 7,647
Houston Texas
|
Quote:
I was kind of thinking that was a wasted effort as the car looked pretty darn good red, then you posted the black photos. Looks great!
Sheldon
It was orange, not red... I think the variation in monitor colors throws people off.
The orange was nice at first glance, but after a little inspection, you would have seen it had some problems. Plus, the big benefit here is that the body got worked over. It is a subtle aspect, but the lines are MUCH better now.
|
|
|
Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: PAINT IT BLACK]
#343499
09/30/09 09:38 AM
09/30/09 09:38 AM
|
Joined: Aug 2004
Posts: 8,526 Tenn.
jrwoodjoe
master
|
master
Joined: Aug 2004
Posts: 8,526
Tenn.
|
Looking good Steve....looking good! Joe
65 Barracuda 70 Challenger
|
|
|
Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: jrwoodjoe]
#343500
09/30/09 09:43 AM
09/30/09 09:43 AM
|
Joined: Nov 2004
Posts: 7,647 Houston Texas
PAINT IT BLACK
OP
Got a CHIP on my shoulder
|
OP
Got a CHIP on my shoulder
Joined: Nov 2004
Posts: 7,647
Houston Texas
|
Quote:
Looking good Steve....looking good!
Joe
Thanks man. I can't WAIT!!!! What stinks is I'll have to sit on it for a couple of months until I wrap up this semester to work on it. Calculus and Physics is kicking my @$$
|
|
|
Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: PAINT IT BLACK]
#343501
11/06/09 11:40 PM
11/06/09 11:40 PM
|
Joined: Nov 2004
Posts: 7,647 Houston Texas
PAINT IT BLACK
OP
Got a CHIP on my shoulder
|
OP
Got a CHIP on my shoulder
Joined: Nov 2004
Posts: 7,647
Houston Texas
|
Ok, for those of you who have been following along... she is back home!!! I have to put her back together over my Christmas break, but at least my baby is back where she belongs. I really want to thank Steve and his crew at Paintshop101 in San Antonio for sticking this project out and not producing anything less than perfection. My project should have cost me twice what it did, but Steve stuck to his word like a MAN and did the right thing. If all guys were like him in the biz, paint/body guys wouldn't have such a bad name. If I were a rich dude, I'd have paid him more because I know it should have cost more. THANK YOU STEVE ENOCHS. You guys who are reading this, please help me pay him back and give him a shot on your next project. Here's Steve and I talking it over one last time.
|
|
|
Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: 78xeMAG]
#343509
11/09/09 07:28 PM
11/09/09 07:28 PM
|
Joined: Jun 2009
Posts: 434 sweden
cuda-sweden
mopar
|
mopar
Joined: Jun 2009
Posts: 434
sweden
|
|
|
|
Re: The 6 year saga continues... My Gran Coupe...er... Cuda
[Re: cuda-sweden]
#343510
02/27/11 04:18 PM
02/27/11 04:18 PM
|
Joined: Nov 2004
Posts: 7,647 Houston Texas
PAINT IT BLACK
OP
Got a CHIP on my shoulder
|
OP
Got a CHIP on my shoulder
Joined: Nov 2004
Posts: 7,647
Houston Texas
|
After some medical setbacks and lack of time, I have been able to do just a few things to the car. It has been on a body dolly for months, and I was able to install a B body rear into it yesterday. Its nice to get the rear wheels back on the ground, if only symbolic.
That's a B body rear with SS springs and Dr. Diff's relocation brackets. I am running the Scarebird rear disk brake setup.
From swapping to the E rear housing to the B rear, I will be able to run a set of shared 15X10's (5.5" back spacing) that I'll use on both my Super Bee and my Cuda. When I'm not running the spare aftermarket wheels (most of the time I won't be), I'll use the 15X8 Rallyes I already own. The wheel adapters you see are there to put the wheel back where it was in the wheel well when an E body rear was being used. The B body rear is 1" shorter on each side, so these are 1" adapters. ALSO, you can't run the Scarebird disk setup with Rallyes unless you use these adapters because of interference. The adapters make everything fit and look just right.
I wanted to ditch the 8.75 rear in my Super Bee in favor of a Dana (High HP), so I literally had it laying around (now I have an E body 8.75 to sell instead). I invested in the relo kit and the adapters for about the cost of a couple of rims. So essentially these changes saved me the cost of two tires because I can share between the two cars and it saved me some space. Plus I didn't know going into this that the Scarebird disks didn't work with Rallyes... having them fit with these adapters was just a fortunate bonus!
Side note: I had some center bushings machined to press into the adapters for good measure. I didn't like how the wheel was going to only be supported by the lugs (as opposed to how the wheel also rests on the axle center normally). I also had to bend the rear sway bar ends in to fit with the different length housing.
|
|
|
|
|