452 factory open chamber heads that were bought from muscle motors years back but were only ran maybe 1000 miles on a street, these have what muscle motors called stage 2 porting with the 2.14 intake valve and the 1.81 exhaust, they are sprung for up to a .650" solid cam, $800+shipping, P.M. me for pics SALE PENDING!
***SALE PENDING***Nos Perfect Circle factory stock replacement 340 grind cam #229-1654. Lift is verified by me. Made when cores and grinding were good. Will pack well. $150 shipped lower 48. Postal money order. Pm me here
***SALE PENDING*** Two primary and two secondary sight glass fuel bowls for 4150 double pumpers . Provisions in all four for accelerator pumps. No floats or pumps. Went with traditional looking bowls for my setup. $150 shipped lower 48 for all four. Postal money order only. Pm me here
Doing a little clearing out of things I won't be using, Indy RB 4500 MW port intake $500, used JE #213465 flat top pistons-4.375 bore, 4.15 stroke, 1.094 pin, 1.858 comp distance-$250 MP master cyl adapter 4 bolt to 2 bolt-NEW-$40 2 nitrous bottle adapters, 1 with pressure gauge-$40 for both NEW Melling SBM oil pump $40 Wilwood wheel spacers-#300-11961-NEW $25 PAIR Comp Cam #947-16 springs with retainers-$125 Manley #221447-16 springs $75 8.75 742 pumpkin, 35 spline Moser spool, 4.56 gear, less than 200 miles on gears-$700 Parts are in Lancaster, Ca, I accept PayPal, or if you have '38 Dodge truck stuff, trade?, contact me here by PM. file too big on intake, can text or email, can take pic of pumpkin, just had carpal tunnel surgery,
1970 'Cuda,Lime Light,499 Indy S/R's 10.70's @125,street driven ALOT! 1966 Barracuda 360,now a 5spd,Hemi Orange,Hot Rod Air, New daily driver-2003 Ram 2500 Cummins 5.9 '69 Valiant 2-dr, sleeper! New project---1938 Dodge truck, plan is a 360 with a A500, AC, Calvert rear susp., rack and pinion front with coils.
I bought multiple matched FG hoods from WS years back in one lot. The ones for sale are new never used, lift off untouched primed hoods. Likely will need some finish work for ideal finish as they are fiberglass, and they could be reinforced for hinge use IMO The hood pictured is NOT for sale which also fits a Polara 500, but it is a match, less the modifications of the hood pin cutouts and air supply, of what is offered for sale here. The stiffening ribs pictured were installed by WS and are included To keep costs reasonable for the buyer, delivery for a fee is possible east of Mississippi, they are located in SW Fla. $400ea OBO PM
1250 Holley Gen 3 Ultra Dominator Carburetor for sale....$900 + Shipping
So I have a newer 1250 carb, and it started life as a 3- circuit carb, and I had it converted to 2-circuit carb by Thumper carbs. It has not been used in a year and just sits in the box. Its the shiney polished silver and black. Was run on my 605 Hemi...and ran well. I can post actual pictures as soon as the camera is charged. I have double that price into it, and the old metering blocks come with it.
#TC-39, and he keeps good records. I have made a few minor changes and probably have all of them written down somewhere.
NOS Mopar Performance P5007140 Magnum R/T cylinder heads
Stock/Super Stock legal per sanctioning body rules (please check to verify) Brand new bare castings, sitting on the shelf 20 years Detail as shown in the video. Hens Teeth.
These were aftermarket general performance heads which underwent the process to be deemed Stock/Super Stock legal per sanctioning body roles (please verify), before being unceremoniously discontinued by the powers that be at Mopar Performance. They are not OEM parts and were never used in production.
Saved for 20 years to support a racer "sometime in the future". The future is now.
$1200 for the pair.
Local sale/Meetup within 50 miles of Metro Detroit/Oakland County greatly preferred.
I really do not want to ship these heavy iron heads but if you insist, I will ship at buyer's expense. Ground shipping quotes from the local Fed Ex terminal: To zip 94306: $403.90 for the pair To zip 53158: $217.26 for the pair Shipping quote based on 56.5LBs per cylinder head, packaged with foam padded (Edelbrock) packaging including insurance. Quotes for reference only: If you prefer your own shipping account or would like to use pirateship or similar, we can work something out.
Original packaging (basically useless for shipping: One Layer of cardboard) disintegrated during a move years ago, and was disposed of.
I no longer accept electronic payment
Please PM for more details and/or telephone number.
Very old but NEW unused stock hydraulic lifters for small block. Part #HT2011. They even smell old. All have a very consistent crown of .003 checked in my tool fixture. I'm going a different direction. $125 shipped. Postal money order only. PM me here.
Hey ya’ll. I have a new Pro 1 Elite Series 5-point Harness.
I bought them, installed them, then never got the car out of the garage before they expired. This would be PERFECT for cars that do not have to be sfi rated belts.
See the pic on the build options when I ordered them.
