Very nice green Plymouth wheel. $200 plus shipping. lafrancebiglou@aol.com

Very nice tan wheel horn switch and cap. $225 plus shipping. lafrancebiglou@aol.com

440 Six Pack intake with 1970 carbs, choke assembly, linkage, fuel lines and coil bracket. Setup is complete but Carbs will need rebuilding.
$2,995

For information or more pics, contact Jeff at Tony's Parts.
302-398-0821
contact@tonysparts.com
Location: Harrington Delaware

I have a rust free 69 Dodge Charger deck lid. It currently has a spoiler mounted but is rust free.
Asking $750
Located in Monroe county South east Michigan
Text works best
734-6263485
Thanks
KID

I have a Pair of 1970 Dodge super bee bumpers. They are good chores for me unless you have nothing at all.
Asking $100
Text is best 734-6263485 text for pic
Thanks. KID

Up for sale is a real nice passenger door for 1969 / 70 Charger . It is still in original paint , I sanded down the bottom edges for you to see the original primers and one layer of paint and no rust holes . Super solid door , has some small dings and dents in it but a real nice door if you need one for your resto . The latch inside the jamb is perfect , no cracking where the phillips screws are . All the guts are still in it also , handle / latch / glass / regulator / etc . This is not a door that will need any rot hole work , again , super solid . $750 OBO

For sale are NOS brushed trim rings for the 1969 only road wheels ( 4 clip ) that I have finally decided I will not be using , so they are being put out there for sale and will also include 4 of the 1969 only 14'' x 5 1/2'' road wheels they belong with / on . These are very hard to find used never mind NOS . In all my years into Mopar , I Have never seen another set . I have gone back and forth all summer about letting these go , and concluded I will not ever use them , so someone doing an OE Daytona ( or whatever you have that uses these ) , these would be for you . 3 are still with the original paper package , one is not . 2 original part number cards as well . One of them which without doubt is and has been with this set the entire time , is still NOS and has never been on a car , but has had a small ding taken out and therefore was re polished / brushed so has a slight different hue to it vs the other 3 never touched ones . Can it have some deeper brushed marks put into to resemble the untouched ones ? I didn't attempt , as you can see now because they are right next to each other , but once on the car farther away might be not noticeable . Because of what I feel the value of these are , I will over describe them for you as if I was buying them . When I say small flaw , one has a small "pin" mark ( see pic ) , and one other has a small , small imperfection right next to a valve stem ( see pic ) . Because of the value and rarity of these , I will not ship them . $4300 , $4000 for just the trim rings .Thank you for the ad .
Berlin, CT

Left and Right rear parking brake cables from a 1969 B-Body, with an 8 ¾ rear diff. Great condition. $50 Can be reached at moparzone4@aol.com Thanks for the ad Moparts

8 ¾ Rear Axle 10-Inch brake backing plates, from a 1969 B-Body. Great condition. $50 Can be reached at moparzone4@aol.com
Thanks for the ad Moparts

10-Inch rear brake drums from a 1969 B-Body with an 8 ¾ rear diff. Great condition. $50. Can be reached at moparzone4@aol.com Thanks for the ad Moparts

69 Charger Left & Right side quarter seals $40
Can be reached at moparzone4@aol.com

Thanks for the ad Moparts

Black windlace for 66 - 70 B-body $20
Can be reached at moparzone4@aol.com
Thanks for the ad Moparts

Center A/C duct for 68-70 Charger, Satellite, GTX, Road Runner, or Coronet. Very good condition. $50. Can be reached at moparzone4@aol.com
Thanks for the ad Moparts!

OEM Right Side (2520902) Power Window motor from 69 B-Body. Motor is not functioning and needs to be rebuilt. $60
Can be reached at moparzone4@aol.com
Thanks for the ad Moparts

69 Charger Driver Side Quarter Window Weather Shield $30
Can be reached at moparzone4@aol.com
Thanks for the ad Moparts

Defroster vent hoses from 69 B-Body with HVAC heater box. $50
Can be reached at moparzone4@aol.com
Thanks for the ad Moparts

Drivers Side Kick Panel Wiring Harness Cover $25
Can be reached at moparzone4@aol.com
Thanks for the ad Moparts

*******SOLD********




****************Sale Pending Pickup 11-24*******************







1968 Plymouth GTX or sport satellite interior door panel trim, complete set, L/R/F/R.

This is the correct OEM metal trim that sits between the wood grain and the vinyl on the interior door panels (door cards), which the reproduction door panels do not come with.

Trim has minor scratches that can be polished out, which are very difficult to photograph.
Can take close up pics and send via email if interested. 4 picture links are below.

The cardboard on these door panels is in really bad condition. The cardboard has moisture damage + obvious major issues but the trim is still very intact and should show well with a careful polish job.

Oakland County, Michigan
(Nothern Metro Detroit Suburbs)

$350 for the set.

These parts are currently not being reproduced and are difficult to find as a complete set. There is another set on Facebook Marketplace for $400 in my area right now.

I’m Willing to package carefully and ship at buyers expense, but prefer a local sale if possible (so you can inspect the parts in person).

I no longer accept electronic payment.
Please contact via pm.

Not exclusive: Also advertised on other sites.

Thanks!

Pic 1
Pic 2
Pic 3
Pic 4

68-69 Plymouth lower grille support.

Brand new goodmark reproduction.
I was able to save my original part, so now this is available.

Yours for $100.
(It’s been 5 years, Believe I paid $180)

Oakland County, Michigan

It would probably cost more than the part itself to ship, so local sale greatly preferred/meet-up.

PM please.
Not exclusive: Also advertised on other sites

I no longer accept electronic payment.

Thanks
Rich

1968 to 1970 Plymouth drip rail molding
*For cars with vinyl roof.

These have a paint marking inside indicating they are for a vinyl roof car.

Note-They will fit too loose on cars that do not have a vinyl roof. I deleted my vinyl top and had to change these. Can attempt better pics and email if interested.

The corner pieces are reproductions,
The remainder are OE.

Driver quality with Repairable dents, could be reworked and polished with some time and skill applied.
Can attempt better pics and email if interested.

Yours for $80.

I have a shipping tube to safely send these, but it’s 5 feet long and there will probably be oversize charges. Will ship at buyers expense for actual cost but prefer local sale/meet up to make sure you’re happy with the parts before buying them.

Oakland county Michigan.
I no longer accept electronic payment.

Not exclusive: Also posted on other sites.

Pm please

Thanks

Rich