New grey trunk mat for 67-69 Darts. I didn't roll it all the way out for the pic but it is new in the box. $60

New black standard package tray (no speaker slots) for 67-74 Darts still in unopened wrapper (top one in 2nd pic.). $45

Original standard package tray from my 69 Dart GT including the pad that goes underneath it (bottom two pieces in 2nd pic.). Pad has some small tears but no material is missing $35

Original black dash pad from my Dart as well. Has 3 or 4 small cracks as shown in the pics but nothing major. It was perfect until the guy at the paint shop leaned on it while removing the windshield molding clips . I'm not sure what to ask for it so I'll put a starting price of $155 o.b.o. and go from there. I have close-up pics of the cracks I can email upon request.

Due to the length of all of these parts, I imagine shipping would be expensive so local pickup is probably best.

gt340 at yahoo.com

hard to find Original
$1850 offers

Passengers needs some finishing.
Can be used as 68 if you drill marker light hole.

Please look at all pics for honest description.
I can send more pics

not made in Reproduction. If you want real MOpar and NOT Fiberglass.

****Passengers' fender needs a few hours still.

Nice Bones.... Inner Frame etc.
Stripped to bare metal.
Work Needed:
*inner fender mount needs 4-6" section to present stock. have Donor Dart Fender.
** small Rust hole at lower dog leg
***Small Patch needed at headlight mount area.
****had a push in Nose of Passengers fender. will need final forming

Real nice set of Fenders.
Pick up in MD Suburbs Washington DC

Overall nice complete set of 1970 and early 71 A body bucket seat cores. Not rusty crusty the frames and tracks are solid. They will basically need a complete restoration but are complete with hinge covers and tracks. These are from a 70 duster and have those seat medallions.
I am asking $750.00 OBRO for them and I can deliver to the mopar nats in August or the BG moparty with a deposit.
If you have any questions feel free to PM me.
Matt

1969 A body transmission. Bought it from a guy who had it gone through. We can pull the cover to verify that as I did when I bought it. Pickup in SW Michigan. $850 obo. Thanks!

I have 2 original 68-69 unsilenced air cleaner assemblies. Used on different 340,383,440 applications. Asking $250.00 each and I can deliver to the mopar nats.
I also have a repro with very nice black wrinkle paint that even has Richard Petty’s signature.
Also asking $250.00

New Old Stock (NOS) AC clutch assembly for Sanden 508 compressor. This is a single groove pulley used with the thicker 17 series AC belts which were used on classic mopars. This is two parts: the single groove AC pulley/clutch assembly AND the "coil" which engages the clutch. Still in original boxes. $100 plus shipping.from 21074

This is what I thought you might have ?? Sent a pm. Sorry couldn't figure out how to send pics via pm.

NOS 3438517 Single Point Distributor

71 340 Automatic Trans

Earlier date code tags are available.

I will have this unit at the Mopar Nationals.

This is the best of the best!

250.00 plus shipping if not in attendance at the event. PayPal preferred. SOLD! SOLD! SOLD!


Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cell/Text

Mopar Nationals Spaces O27-O31

Selling a 1969 Dart AM thumbwheel radio for parts only. Can send pics. 50.00 plus the ride or can deliver to Mopars on the Mississippi at Dubuque Iowa with prepayment. Contact me via pm.

Part# 2864790. Comes with original nut. $40 shipped in U.S. No Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

70-72 Duster Nice straight OEM bumper core or driver shape, 2 small dings otherwise great shape, chrome is worn. $125, All bumper mounting hardware, lightly pitted but very good and not bent. I will through in the rear marker light if needed. $100. I would like local pickup for bumper and will ship brackets on your dime. lafrancebiglou@aol.com

68 Dart gas pedal. $10 plus actual shipping. Hasn't seen daylight in 40 years. PM on board if interested.

Wiper linkage. 68-72 dart valiant barracuda ect. Not for duster or demon.
Everything is in good shape. Pivots turn freely no weird wear. $140us + actual shipping (30-40 us/canada). PayPal ok. At 3%
Pt#’s 2857934,935,936,937

Very hard to find
Hurst Ramrod Shifter complete for Mopar A Body.
In great shape. New clips and bushings
Complete bolt in and go
All correct parts nothing mismatched, all in great shape
1200.00 plus shipping

Pair of new 340 2 1/4" tail pipes by Accurate Exhaust for use with chrome tips. $250 plus UPS or pick up on Long Island. rich1981@optonline.net

Mr. Norm's Tri Power air filter. 100% correct using an original pattern and mold. I could never find one for my car, so I had a filter company agree to make a very limited run of them for me. Less than 20 available. 299.00 + 20.00 shipping. PayPal Friends and Family or money order. PM me here or jim@heartlandtire.net I can also bring to MCACN in November

I have a few original small block water pump pulley's for sale.
#1 is part number 3698907D it has a diameter of 5 7/8" and is 1 1/4" deep.
I show this application as Challenger, Cuda and Dart with 340 and 360 engines.
I have 3 available and priced at $30.00 each.
#2 is part number 3769132 it has a diameter of 6 5/8" and is 2 1/4" deep.
I show this application as 318, 340 and 360 engines.
I only have 1 of these and it's priced at $30.00.
#3 is part number 2951836D it has a diameter of 6 7/8" and is 3" deep.
I show this application as 70 T/A, AAR and Dart with 340 and 360 engines.
I have 2 of these priced at $40.00 each.
#4 is part number 3698805 it has a diameter of 5 7/8" and is 2 1/8" deep.
This is a 2 groove pulley and I show the application of 318, 340 and 360 engines.
I only have 1 of these and it's priced at $40.00.
Shipping is extra so if interested contact me at: jnborzych@gamil.com with your zip for a shipping quote.
Thanks!

I have the following original fan spacers for sale priced at $15.00 each.
#1 2120510 1 9/16" only have 1
#2 1674746 1 11/16" only have 1
#3 2863219 1 13/16" have 2
#4 2265036 2" only have 1
#5 2265035 2 3/16" only have 1
#6 2920130 2 3/8" have 4
I also have 2 sets of original mounting bolts for the 2 3/8" spacers priced at $10.00 a set.
The 3 non original spacers in the back are priced at $10.00 each.
The prices do not include shipping.
If you are interested contact me at: jnborzych@gmail.com with your zip for a shipping quote.
Thanks!

NOS 1968-76 A & B Body turn signal lever 2947963 still in the factory unopened packaging........$65

Thank you

716-997-0070

bakurruda@aol.com