Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
For Sale/ Wanted - Small Block Engine - 3rd Quarter #3241609
06/30/24 09:10 PM
06/30/24 09:10 PM
Joined: Jan 2003
Posts: 15,586
Norwich CT USA
moparts Offline OP
I Live Here
moparts  Offline OP
I Live Here

Joined: Jan 2003
Posts: 15,586
Norwich CT USA
up

Re: For Sale/ Wanted - Small Block Engine - 3rd Quarter [Re: moparts] #3241733
07/01/24 02:54 PM
07/01/24 02:54 PM
Joined: Aug 2005
Posts: 950
East Brunswick, NJ
B
budman1965 Offline
super stock
budman1965  Offline
super stock
B

Joined: Aug 2005
Posts: 950
East Brunswick, NJ
Holley Street Dominator aluminum intake manifold for a small block engine. Fits 273, 318, 340 and 360 engines. Intake is in good condition with no stripped holes. Could use bead blasting. Asking $125. Contact Bud: Kramden426 at aol.com.

streetdom2.JPG (293 downloads)
streetdom3.JPG (292 downloads)
streetdom.JPG (292 downloads)
streetdom4.JPG (290 downloads)
Re: For Sale/ Wanted - Small Block Engine - 3rd Quarter [Re: moparts] #3242463
07/04/24 09:11 PM
07/04/24 09:11 PM
Joined: Jan 2003
Posts: 5,690
Detroit area
6PAX Offline
master
6PAX  Offline
master

Joined: Jan 2003
Posts: 5,690
Detroit area
70 B-body voltage regulator mounting bracket. $15

New chrome coil cover & coil mounting bracket. $20

NOS Cal Custom chrome radiator cap. $20

NOS Cal Custom chrome battery hold down. $25

Four new extra wide chrome valve cover hold down clamps. $10 for the set

New exhaust manifold heat stove to air cleaner flexible hose. $20

NOS fan clutch 3769614 for 1974 all V-8 engines. $100

Factory warning light type oil pressure sending unit. $10

Gauge type oil pressure sending unit. $20

Vintage Cal Custom 14" finned aluminum air cleaner with filter. $100

1970 Style single nipple oil breather with hose. $30

New 12" oval 4 barrel finned aluminum air cleaner with filter. It measures 12" L x 8 1/4" W x 3" H and has a 5 1/8" carb opening. $55

New Mopar Performance chrome water neck. Was bolted on an engine but then taken back off before the engine was ran. $10

AC alternator bracket from a mid 70s 360. $10

New Mr. Gasket chrome oil filter cover. $15

9 Chrome t-handle valve cover bolts. $10

Factory starter, part/casting #3755259. This came off of my Dart about 10 years ago. Worked fine then, been sitting on a shelf ever since. $40

Two 318 driver side spool motor mounts pt#3642811. One is used and one is NOS. $20 for the used. $35 for the NOS.

Edelbrock Elite small block valve covers EDL-4295 with bolts, breather & PCV valve. Very nice condition. $200

NOS Cal Custom chrome dagger dipstick handle. $25

New Mopar Performance 5 blade radiator fan and clutch. $100

Pioneer Automotive cylinder head dowel pins. 21 pieces 1/4" x 5/8". $10

Howard's solid flat tappet cam for Mopar big blocks, part number CL722322-08. See links below for specifications. I bought this cam for my engine with the intention of taking the car to the track when the car was finished being restored along with the engine being built but I have changed my mind about racing the car and decided to go with a milder hydraulic cam instead. I had this cam installed in my engine on the engine stand only (engine is still on the stand) so it has never been run and is essentially new. $375

New set of COMP Cams 973-16 - Inner Valve Springs. $45

2 used Holley 450 cfm carbs, part number 9776, for dual quad set-ups. Carbs are in nice shape and worked fine the last time they were used. The only thing wrong with them is on one of them the small vacuum fitting that sticks out the side needs replacing as the tube broke off. $450 for the pair.

Chrome single groove alternator pulley. $15

1975 Date coded alternator. Part #3874271. $25

Rev-n-nator Coil and programmable ICU. $200

Vintage Cal Custom scoop style air cleaner. Includes often missing matching wingnut. $300

New in boxes QTP 2 1/2" electric exhaust cutouts #QTEC50, stainless y-pipes #10250 and remote controller #10900. $654 total price at Summit. $550

Prices do not include shipping. No Paypal

Email: gt340 @ yahoo.com

New SCAT 360 & 5.9 Magnum Stroker Rotating Assembly [Re: 6PAX] #3242725
07/06/24 07:15 PM
07/06/24 07:15 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT


I have a new SCAT & Diamond forged rotating assembly for 360 & 5.9 Magnum Mopar engines. All parts are new high-quality parts. Final cubic inches will be 408”.
The assembly includes the following parts.

• SCAT forged 4.000” crankshaft part # 4-360-4000-6123
• SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A
• Diamond Forged flattop 4.030” bore pistons (0.030” oversize) part # 51026
• Trend wrist pins - 0.984” part # TPD-G9842750155
• Diamond wrist pin locks
• Mahle file fit ring set with Moly ductile iron top rings part # MAH4035MS
• Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH
• Clevite P-Series full groove main bearings part # MS-1266P

This rotating assembly will need balancing.

Price for this complete kit is $2,750 plus shipping cost. I may be able to deliver to Carlisle or can meet in CT.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

P1070488.JPG (136 downloads)
P1070491.JPG (137 downloads)
P1070498.JPG (136 downloads)
P1070515.JPG (136 downloads)
New SCAT Forged 340 Stroker Rotating Assembly [Re: Rocket] #3242726
07/06/24 07:17 PM
07/06/24 07:17 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT

I have a new SCAT forged rotating assembly for 340 Mopar engines. All parts are new high-quality parts. Final cubic inches will be 414”.
The assembly includes the following parts.

• SCAT forged 4.000” crankshaft part # 4-340-4000-6123
• SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A
• Diamond Forged flattop 4.060” bore pistons (0.020” oversize) part # 51028
• Trend wrist pins part # TPD-G9842750155
• Diamond wrist pin locks
• Perfect Circle file fit ring set with Moly ductile iron top rings part # 315-0036.065
• Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH
• Clevite P-Series full groove main bearings part # MS-1344P

This rotating assembly will need balancing.

Price for this complete kit is $2,750 plus shipping cost. I may be able to deliver to Carlisle or can meet in CT.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

P1070488.JPG (136 downloads)
P1070491.JPG (136 downloads)
P1070519.JPG (136 downloads)
P1070512.JPG (136 downloads)
New BRC 4.030" Forged Pistons and pins for 3.79" Stoke Crank [Re: Rocket] #3242728
07/06/24 07:22 PM
07/06/24 07:22 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT


I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. Pins are 0.984”. Approximately 6cc valve reliefs.

These pistons can be used in aftermarket race blocks or stock 360/5.9 magnum engine blocks.

Price is $475 shipped in the lower 48 states. I will ship elsewhere for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

BRC 3.79 P1.JPG (135 downloads)
BRC 3.79 P4.JPG (134 downloads)
BRC 3.79 P2.JPG (134 downloads)
BRC 3.79 P3.JPG (135 downloads)
Mopar Small Block Forged 4.060” Bore Pistons for 3.454” Stro [Re: Rocket] #3242729
07/06/24 07:25 PM
07/06/24 07:25 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT


I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my measurement.

Price for the set is $480 shipped in the lower 48 states. I will ship internationally for the extra cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

P1070416.JPG (134 downloads)
P1070417.JPG (133 downloads)
P1070421.JPG (134 downloads)
P1070420.JPG (133 downloads)
Small Block Solid Roller Lifters For Race Block - New [Re: Rocket] #3242730
07/06/24 07:29 PM
07/06/24 07:29 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT


I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the description. The roller wheel size is ~ 0.80”.
The price for the 11 pairs is $650 shipped in the lower 48 States. I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

R Block Lifters 1.jpg (133 downloads)
R Block Lifters 5.jpg (132 downloads)
R Block Lifters 6.jpg (132 downloads)
R Block Lifters 7.jpg (133 downloads)
W2 Small Block Head Costings - New [Re: Rocket] #3242731
07/06/24 07:31 PM
07/06/24 07:31 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT

I have a pair of new individual W2 race head casting number P5249769. These heads have no machining performed. As delivered by Mopar including 3/8” iron valve guides and closed chambers. These heads require the use of T&D or Jesel rocker systems.

Price is $1,200 for the set plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

P1070090.JPG (131 downloads)
P1070096.JPG (131 downloads)
P1070095.JPG (132 downloads)
P1070092.JPG (131 downloads)
Last edited by Rocket; 07/06/24 07:32 PM.
Small Block Roller Rocker Kit 1.6 Ratio - New [Re: Rocket] #3242733
07/06/24 07:36 PM
07/06/24 07:36 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT
I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.

Price is $510 shipped in the lower 48 states.

Email me at procketrichard@hotmail.com with any questions or for more pictures

IMG_5582.JPG (129 downloads)
IMG_6206.JPG (129 downloads)
IMG_6207.JPG (130 downloads)
IMG_6208.JPG (130 downloads)
Last edited by Rocket; 07/06/24 07:36 PM.
W2 Mopar Performance Small Block Exhaust Roller Rockers [Re: Rocket] #3242735
07/06/24 07:44 PM
07/06/24 07:44 PM
Joined: Feb 2006
Posts: 903
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 903
CT

I also have 16 new Mopar Performance 1.5 ratio roller W2 exhaust rocker arms for the W2 & W5 Race heads using offset drilled blocks and shafts. I will sell individual rockers or sets of 2, 4,6 or 8 as needed. Individual rockers are $40 each plus shipping. A set of 8 is $280 shipped.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

P1040768.JPG (150 downloads)
P1040771.JPG (150 downloads)
P1040774.JPG (151 downloads)
P1040773.JPG (151 downloads)
Custom Small Block 3,4 Speed Throttle Cable Bracket [Re: moparts] #3243588
07/11/24 05:39 AM
07/11/24 05:39 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Custom Small Block 3,4 Speed Throttle Cable Bracket. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Note: Works with any high rise intake or carburetor spacer

W-2 Small Block Throttle Cable Bracket [Re: Memongo] #3243589
07/11/24 05:40 AM
07/11/24 05:40 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
W-2 Small Block Throttle Cable Bracket. New, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Small Block Carburetor Throttle Return Spring Brackets [Re: Memongo] #3243590
07/11/24 05:42 AM
07/11/24 05:42 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Small Block Carburetor Throttle Return Spring Brackets. Used, $15 each + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Factory Small Block Valve Covers 318,340,360 [Re: Memongo] #3243591
07/11/24 05:43 AM
07/11/24 05:43 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Factory Small Block Valve Covers 318,340,360, Used, $50 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Note: All Harness, Wire Brackets Intact!

Factory Small Block Valve Cover Breather [Re: Memongo] #3243593
07/11/24 05:44 AM
07/11/24 05:44 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Factory Small Block Valve Cover Breather. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Valve Cover Oil Fill Caps [Re: Memongo] #3243594
07/11/24 05:45 AM
07/11/24 05:45 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Valve Cover Oil Fill Caps. Used, $10 Each + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

1. Not sure!
2. 73-74 model (came of my 73 Cuda)
3. Mopar Preformance Chrome New!
Call Steve 810-629-1097
Note: Pick the one you want by photo 1-3

Oil Cap 2.jpg (47 downloads)
Oil Cap 3.jpg (47 downloads)
Oil Cap Chrome.jpg (47 downloads)
Small Block Spark Plug Wire Looms [Re: Memongo] #3243595
07/11/24 05:46 AM
07/11/24 05:46 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Small Block Spark Plug Wire Looms. Used, All 7 Looms, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Small Block Heater Hose Bracket [Re: Memongo] #3243596
07/11/24 05:47 AM
07/11/24 05:47 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Small Block Heater Hose Bracket. Used, $15 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!
Call Steve 810-629-1097

Small Block Distributor Hold Down Bracket [Re: Memongo] #3243597
07/11/24 05:48 AM
07/11/24 05:48 AM
Joined: Dec 2012
Posts: 4,238
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,238
Fenton, MI
Small Block Distributor Hold Down Bracket. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Page 1 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1