WANTED 1968-9 Street Hemi parts left over from restoration. Power steering hose 2537 980 Hemi carbs 4430,4431, &4432. exhaust manifolds Bob Horman

For Sale, '66-'69 hemi base plate for "chrome dome" . Very good condition, no cutting or modifications. $300 plus the shipping from Phoenix, AZ . NO PAYPAL!! payment by postal money order or personal check.

WANTED
Chrome dome hemi air cleaner top, prefer top only .
it can be bent, cut , little rusty , I dont care

I just want it for garage wall art

Weiand tunnel ram and Holley carbs for Hemi. The numbers on manifold appear to correlate with Direct Connection catalog from the 80's. Carbs are old 3 circuit Dominators, approx same era. Manifold has been opened up for air flow. Bolt holes look good.
Pulled all bowls off, no oxidation inside, nice and clean. Part numbers are in pictures. $1500.00 OBO. Thanks Moparts!

426 HEMI 1X4 intake manifold off a crate motor, I do not believe that it has ever been ran on a motor $450.00 (708) 288-2879

** SOLD **

426 Hemi intake manifold. This is one of the newer replacement manifolds not a vintage original. I believe this was installed and used for a short time but very clean with no damage or modifications. Located in southern New Jersey. Price is $600.00. Buyer pays shipping, free local pickup or free delivery to the Mopar Nationals. For questions or to see additional pictures message me here or email hemicarbguy@gmail.com .

Thank you.

** SOLD THANK YOU **

** SOLD **

E Body 426 Hemi air breather assembly; shaker baseplate, lid and filter element. These are reproduction pieces. Baseplate was modified for use with air conditioning. These pieces were used for a short time but are still in good condition. Located in southern New Jersey. Price is $500.00 for the three pieces. Buyer pays shipping, free local pickup or free delivery to the Mopar Nationals. For questions or to see additional pictures message me here or email hemicarbguy@gmail.com .

Thank you.

** SOLD THANK YOU **

WANTED 1966-69 MOPAR HEMI engine starter heat shield. ORIGINAL ONLY Bob H

WANTED - Single HEMI head cast number 2780559-F. Need to replace one that is cracked. Must be virgin, unported, crack free orig. email vintageignition@yahoo.com

I have a set of 426 Hemi Heads for sale. Casting dates are E.31.6 & E.27.6 I was told they came off of a Stock Eliminator race engine, hence the milling on the intake side of the head. I am not a racer, so I do not know. I had them magnafluxed and they are crack free. They are not O-ringed. I have more pictures if needed. email me at: trdeppen"at"comcast.net or pm me here. $3000 local pick-up or buyer pays shipping. Thanks for the ad!

For sale 16 bolt Ray Barton dominator intake. New 550$ plus shipping.

For sale Hemi Block $5800 PM me here, or call me at 716-830-1258 or email me at Dragula426@gmail.com

Callies Hemi Iron block

Slightly used, nothing wrong with it. Could use a final hone for cross hatch, but all is good.

Currently painted orange

Had this in my Cuda as a 605 a couple years back, hurt a rod bearing and went and used another block

Block has a 4.500 bore, and is clearance for a 4.75 stroke.

I have a set of Diamond pistons that can go with it for extra. They are 4.503 or there abouts. They are also for a 4.75 stroke and a perfect fit with a hone touch up.

426 HEMI Stage V intake roller rockers, set of 8, nice used condition $800.00 for the set (708) 288-2879

Wanted....650-680 lift solid roller camshaft for gen 2 hemi....possibly a racer brown..

For sale: 1970 426 Hemi block, has cracks on main bearing saddle areas, no VIN on the block, standard bore. 1970 Hemi heads, with valves and springs, block and heads have been O-ringed, Hemi crankshaft, fresh 10/30 grind and polished by legendary Henry Velasco, set of stock Hemi rods(needs resized), Hemi rocker arm set up, Hemi oilpan. Located in Palmdale, CA. $11500. Price negotiable after you have inspected the parts. Pictures available upon request, not able to load pictures here for some reason. Email: ebodycab@msn.com. Phone: 818-426-8685.

Looking for a complete set of dick landy or Norris rocker arms.

Pm me here, thanks

For sale: 1pr original 1970-71 Hemi black wrinkle valve covers, $2500. Close up pictures available upon request.
Email: ebodycab@msn.com. Phone: 818-426-8685

For sale: 426 Hemi Kellogg crankshaft, std/std, polished by legendary Henry Velasco. $2500. Close up pictures available upon request.
Email: ebodycab@msn.com. Phone: 818-426-8685.
:

605 Hemi for sale...$35k negotiable.
(716) 830-1258 or PM here or email me at Dragula426@gmail.com

Has 10-15min run time on it since built. Not even broke in yet.
Hemi with 11:1 built by Ron Farley
New Comp street friendly roller cam .704 lift
Spray bars for the valve springs were added to this build
New roller lifters, forget what brand
Reduced valve spring pressure from what I normally run to better street it
Custom upper rocker & valve spring oiling to help keep eveything alive on the street
Brand new Callies block, I have two and put my rotating assembly and heads in the new block.
Block is internally coated in glyptol to promote oil drain back
Has a 12 quart custom pan with AN16 pick up
Milidon pump and cover
Indy Hipo big valve heads, flow sheets available on request.
Indy 426-3 big 4500 intake ported by me
Sniper 4500 efi system good to 1200hp, starts and runs like a nice mild street car in all weather.
Indy valve covers
Mezeire big water pump

426 Hemi Rear 4346 C0 Cheater carb restored. This is the 750cfm carb. Primaries are 1 11/16" like the secondaries. $1000. Also have other Hemi carbs and always looking for hemi carb even parts carbs.

PM me. Can send more pictures.

1 Pr. brand new reproduction 426 HEMI Super Stock velocity stacks for cars with crossram intake manifolds, never been installed on a car $950.00 for the pair (708) 288-2879

426 Hemi steel air lids for Stage V or Marine intake manifolds. Made in the U.S. 165.00 plus shipping