Looking for a section of the center hump to convert a 4 speed manual car back to an automatic. Would also need the bracket that holds the shifter, i have the other two brackets but would buy the set if that is what you have. Please let me know what you have, and picture would help. Send pics to Johnmn420@aol.com Thanks for your help.

John

Thanks for the response. found the Hump now I need a complete 904 /318 kick down linkage set up..... I have some of the parts but I think that the rod that connects to the kickdown lever is what I am missing plus the right lever for an E-body. Let me know what you have and pictures are appreciated.

71 cuda nos or very nice original sheet metal wanted.

Front and rear lower valance
Deck lid with spoiler cutouts
Header panel
Rocker panels (nos)
1970 front floor pans (nos)
Dutchman panel
70-71 taillight panel (nos)
70-71 lower trunk extensions (nos)

Looking for a working small block 727 with a good converter. Swapping a 3 speed manual trans to automatic. which I hope to do a Gen III swap at a latrer date. Preferably located in MN, IA, WI area to pick up. Not looking to rebuild it. It would just be an interime Trans.


Johnmn420@aol.com
952-239-6883

Thanks
John

Wanted 1970 only non air dash pad preferably used original in good to excellent condition?? Contact DAN at 724 858 6662 orPM

71 cuda black leather pieces needed

Drivers side seat bottom

Rear seat bottom

Thanks!

Looking for a NOS Tie Rod End Part # 3420155 for an E-body
PM,text or call cell 914-843-9617
Thanks Bob

Looking for a NOS E Body Idler Arm part # 2835834 or 2835886
PM ,Text or cell 914-843-9617
Thanks Bob

Wanted: 1970 Challenger rear speaker fader switch/knob. I need the switch for the 5 speaker AM/FM R35 radio. Also looking for the switch panel. PM me if you can help. Thanks

Wanted: Both front seat covers for a 72-74 Cuda in Black, Good used ones are fine.

Let me know what you have. I may even consider the entire bucket seat if the seat covers are nice for the right price.

Thanks,

rocksmopar@gmail.com

Wanted 71 cuda nos red side marker lens( long ones ) with the tabs...thx Keith 318-393-1502

Looking for title for 1970 Barracuda. Bought 1970 with bill of sale only and want title. Anyone have old papers to a wreck? I can't register mine without a title. Message me.

Looking for a nice set of original 1971 Challenger fenders. No rust. Local to Lancaster, PA.
please email pete@ntrcs.com

Please contact the buyer via pm or e-mail. This is not a discussion forum!

FOUND..thanks.


Looking for 2, 6x9 rear speaker cores to have restored for 1970 challenger.
They don't have to be '70 they just have to look correct.

PM here or call or text Rich 815-790-1974.

Thanks

*WANTED* (Still needed as of 3/28/24)
-ECS Brand 1970 Cuda Trunk Mat
-Please dont contact me about NOS mats or other aftermarket trunk mats. Looking specifically for the ECS brand mat the late Dave Waldens company made up a few years back.

Mike
Call/Txt- 516-250-2366

**please let me know if you actually want to sell one, not telling me you have one. thx in advance.

WANTED: Right rear window regulator for 1970 Challenger.

PM me here with price and condition. No junk!

Thanks

Looking for the rear window inside trim mine has gone rogue and can’t find it for a barracuda
Thanks

Looking for fenders, roofskin, rockers, trunkpan, front valance, Passenger door and just about every other outer sheetmetal component for a 72-74 Cuda.

I'm in Chicago so not too far if you won't ship.

Thanks,
rocksmopar@gmail.com

wanted...original speaker grill screws for the two outside speakers on a 70-71 e body dash...these have a fatter head than senter speaker grill...thx keith 318-393-1502