NOS E and B body engine bracket left side 318 mopar part 2806025. I think it fits 70-72 E and B body but not positive so do your research first. $45 plus shipping $9.00 Sorry............. SOLD !!!!!!!!!!

SOLD

I have this nice clean pit free 1970 slide in shifter mechanism for E-bodies.
Everything works as it should, nice smooth operation, no need to send out , can bolt right in and use.
7180 on arm indicating correct application....70, early 71 E-body.
Hard to find, one year, one application use, later 71 -4 used bolt in style mechanism.
**SOLD** USPS Priority shipping included... to the lower 48 from 13622 NY
pm, email or call 613-382-3550
Thanks for the ad
Terry

This stainless is NOS in its original Chrysler sleeve packaging part number 3419800.
It is the left ( drivers ) side top quarter molding for 1970 and 71 Challenger convertible
In flawless condition, no marks, scuffs, scratches, dents, or imperfections...just removed from the sleeve for photos.
Doesn't get much better for that top restoration or for your driver.
Hard to find good even in used condition, I'm selling this for $325.00 shipping included USPS to the lower 48 from 13622 NY
pm, email, or call 613-382-3550
Thanks for the ad
Terry

I recently came across these that I had misplaced many years ago.
I purchased these grips, part number 2996466-7 and the 3 screws part number 9431606 as receipt shows in 1984.
Shortly after that they became NS-1
I have lots of photos along side of reproductions showing subtle and not so subtle differences, can only post 4 pictures here.
Last 2 pics are NOS originals on left beside current offered reproduction handle and its shiny grips with stainless screws,... not chromed like original ones.
Repro only looks bigger because was closer for photo, they are exact same contour, just the different finish is obvious.
There are many reproduction variables out there,... some very good, some not, but none as exact as original.
If you'd like to upgrade your handle with correct NOS North American made for Chrysler parts, these may fit the bill.
***SOLD*** USPS Priority shipping included to the lower 48 from 13622 NY
pm, email. or call 613-382-3550
Thanks for the ad
Terry

Original 1970 1971 Challenger Cuda 440 440+6 Hemi leaf springs, matched pair, $1495

Email Kenei@comcast.net

Excellent condition. $200 plus shipping. No Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

-Chrysler Part. # 2852 175
-NOS 7290 U-Joint Set
-U-Joints still sealed in there factory bags.
-These would be perfect for an over the top restoration. The 1%ers need this.
-Not sure if boxes pictured are the originals with a superceded part#.
-if you need more pictures, please let me know

$600 OBO

Mike
Call/Text 516-250-2366
Free Shipping in the USA

-NOS E-Body muffler heat shield set
-Chrysler Part# 3404 595/6
-The muffler shield you see that is in dark gray primer has mint galvanized spangle finish underneath the primer. I gently scraped some of the primer off to reveal this insane finish.
-The muffler shield you see with a mix of silver and red oxide primer does not have the galvanized spangle finish on. It looks to me more regular galvanizing.
-For that over the top restoration. The 1%ers need this!!!!!
-Please let me know if you need more pictures of these items.

$1400 OBO

Mike
Call or text 516-250-2366
Free shipping in the USA

-NOS 10“ x 2 1/2“ brake shoe set.
-Chrysler part number 3528 333
-need some cleaning but should clean up nice.
-detail your Dana 60 rear with the correct brake shoes.( for that part the judges will never see. lol)
$350 OBO

Mike
Call or text 516-250-2366
Free shipping in the USA

-bag of nice condition wire that came from harnesses I pulled apart over the years. this wire can be reused and is not dried out.
-perfect for someone looking to fix or restore their original wire harness with the correct wire.
-keep in mind that M&H harnesses don’t come close with their color matching and stick out even on the more well restored vehicles. (Not a dig at MH, there quality is good but wire color match not so good, LOL)
-Why the heck would you want something that’s only 85% correct when you can fix or restore your original harness with the real wire that came on our mopars back in the day.

$125 OBO

Mike
Call or text 516-250-2366
Free shipping in the USA

V I N rivets $25.00 a pair delivered anywhere in the states
Julius
Julius@rbyj.com

-NOS E-Body Upper Ball Joint Set
-Chrysler Part # 2298 534
-Factory installed break off zerk grease fittings.
-One ball joint and the associated hardware is shown. the box with the other NOS ball joint is sealed.
-These would be perfect for an over the top restoration. The 1%ers need this!!
-If you need any more pictures, please let me know.

$1300 OBO

Mike
Call or text 516-250-2366
And as always free shipping in the USA.

Complete Slap-Stick shifter assembly with all brackets still attached to floor section removed from a 1970 Challenger.
This is the same as a 1970 Cuda' and Barracuda and also the same as all E - Bodies thru '74 although they would use a T handle.
I believe this is the same as the B bodies, 1971 thru 74 although they too would also use the T handle.
All brackets still welded to the factory locations so you know where to weld on your floor.
Also, the lower seat bolt attach point floor stiffeners still factory welded to the underside.
$300
Located in Sheboygan, WI
Ph: 920-889-2886
Em: hatrick5hole@aol.com
Best to email as I don't see PM as often.

1970 grand coupe front door panels and i do have the back pieces not on the panels . 2 are bad the other 2 i think are usuable .$300 plus shipping. shipping in the box it would be about 130$ to about michigan 15 pounds weight. panels are for a driver i just do not want to remove moldings myself. please ask if unsure 815 520 3227 till 9 pm arizona time paypal is fastest. postal money orders take time to process. TEXT ME FIRST IF INTERESTED THEN I CAN YOU BACK. please no pms. i dont live on here.

-NOS 3420 155 Inner Tie Rod Set.
-These fit E-Bodies and could possibly fit other models as well. (Consult the parts book to be sure).
-I don’t have the boxes
-Zerk fitting missing and NOS boots added. These tie rods came loose in a parts collection I bought out years ago.
-Free Shipping in the USA.

$800 OBO

Mike
Call/Text 516-250-2366

Mopar NOS? flex fan blade 3462150 Looks unused can`t verify for sure. About 18 to 18 1/2 kinda hard to measure exactly. Some research shows it possibly fits

1971 318 with a 2.71 or 2.76 rear gear, many cars except A-body;

1972 same 318, PLUS some 400, 440, used on most cars except A body It looks like it is date-coded G72 - July 1972.

$40 plus shipping

NOS kit purchased in the 80's from dealer as seen on last picture with receipt.
These are the factory installed ones, correct numbered NOS bushings 1400269 and nuts.
For Cuda Challenger rear springs, 8 3/4 or dana.
Another set sold in Nov last year on here for $750.00 as seen in the Moparts ad
***SOLD** USPS Priority shipping included from 13622 NY
Thanks for the ad
Terry

A set of four Dodge Challenger wheelcovers. One has a couple minor dings as show in the pics. Included is an extra 5th one with no dings, but a damaged center, if you want to try to swap centers. All five wheelcovers included in this sale. Not NOS, but a nice set.

$400 / set of 5, plus shipping. I'm never offended by offers. More pics available upon request. TWSchuler@aol.com

Used 1971 Challenger locking gas cap with key, in excellent condition.

$400, plus shipping. I'm never offended by offers. TWSchuler@aol.com