FOR SALE 1968 Mopar Hemi distributor IBS 4014A-38-8 Chrysler 2875140. Completely rebuilt/restored to factory specifications. New points and condenser, new vacuum advance unit, new correct lead. no expense spent. Completely detailed. comes with all paperwork from Halifax Shop. Price $850.00 shipping included in price Bob Horman

Not parting out or splitting engine or trans.
$25,500 picked up in York,Pa 17408

484 Hemi and trans specs
no carburetor
484 Street Hemi
Mopar block cast number 2468330-M
Pre-"World' iron block (2008)
4.15 stroke Eagle crank
4.310 (+.060")
10.25 to 1 Icon forged pistons
RPM rods
Edelbrock Hemi heads
.620 Comp roller cam & lifters
Barton 4150 single plane intake no carb
12qt Aluminum oil pan
Milodon oiling system
will run on pump gas
727 automatic trans
J convertor,
full manual valve body
deep trans pan
10.20's at 132mph in a 3000lb Barracuda
4 runs on fresh setup
$25,500 picked up in York,Pa 17408 (717) 577-0270

1970 426 HEMI 4-speed distributor OEM concourse restored
No excuses, ready to run. Fully rebuilt & restored. Tuned and setup by Joe's distributor.
New points
New condenser
New wire lead
New cap & rotor
Rebuilt vacuum advance

Ready to run, set initial timing to 18' perfect OEM concourse

SOLD SOLD SOLD

1966 to 1969 426 HEMI chrome dome air cleaner base, lid and filter, the filter element is used original not new $1500.00 for everything (708) 288-2879

One Pr. 1970 & 1971 426 HEMI valve covers, original not reproduction, they have been stripped to bare metal and the restoration has begun, as you can see in the pictures it needs to be finished, selling as is $1500.00 (708) 288-2879

Steel Stage V air lid for your Hemi's. Made in U.S.A 155.00 plus shipping

One more time, 472 crate hemi built by Moran Racing of Taylor Michigan. If you're not familiar with Moran, they build big HP/high-dollar engines; this one is neither, just a 472/579 hp street engine. As-built, it was topped off with a Big 3 EFI set-up for E85 fuel. I recently removed that and installed a new Stage V Engineering 'Rat Buster' 2x4 inline with 2 rebuilt 600 Edelbrock carbs as there seems to be more interest and desire for the old-school look. $24K firm, located in Southern Tennessee. If interested, PM me here for info and details. Thanks for viewing, much appreciate

Mint original, with new cap/Rotor. Part# 28775327. I believe MoPar Performance item. $550 shipped. lafrancebiglou@aol.com

An original 426 Hemi fuel pump, 4024SA. date code B-7. Restored and rebuilt by Brian Brady using NOS internals. Comes with the original style fittings as shown (over $100 just for the fittings).

$700, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An original 426 Hemi alternator pulley, part number 2095059. Reproductions list at $95.

$90, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An original 426 Hemi balancer. Well used. Can the holes be re-welded, that I don't know.

***SOLD***, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Ive got a Brand New set of Edelbrock 61175 Victor Jr CNC Cylinder HeadChrysler 426-572,these are set up for hyd roller cam,new in box,looking to trade for some 426 hemi parts,looking for a duall carb set up,either crossram with carbs or inline with carbs ready to run,let me know what you have,also may be interested in some high end rocker gear,barton,stage v,let me know if there is any interest,john franklin fall river wi bogbaits12345@gmail.com,im hearing impaired so text or message works 9202109320

426 Hemi crankshaft. I got this with a recent parts purchase, haven't had it checked. Needs a polish.

$300

Thanks