Brand new GZ Motorsports mopar drive mandrel. $140 shipped in the lower 48 states
PM me or email me at Fincher408@aol.com

Good used 8201 MSD Blaster Coil for MSD-7 series control units.


79.00 plus shipping. PayPal preferred.


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

Good used set of Accel 8MM race wires for small block Mopar.


Used only for mockup and have been in storage.


69.00 for the set plus shipping.


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

NOS Mopar Performance Master Cylinder Adapter


This is used to mount the later style 2-bolt aluminum master cylinders to the standard 4-bolt mounting pattern on all Mopar cars.


30.00 plus shipping. PayPal preferred. SOLD! SOLD! SOLD!


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

SOLD THANKS! Holley 830 cfm. Came with a Penske R5 I bought a number of years ago. Hasn't been run in several years so you may want to go through it but a real clean carb. $350.00 plus shipping. Payment with postal money order. Please PM me if interested. Thanks, SOLD THANKS !

SOLD!

I have for sale a used Stroud #516 trans blanket that was removed from a 727 trans. It’s in excellent shape, is clean and has no damage. It is black nylon, meets the SFI 4.1 rating and measures 18 in. x 51 in. It’s also not trans specific so can be used with any trans as long as the dimensions fit.

https://www.summitracing.com/parts/sts-516

The date of manufacture is May 2018. I would like to get $100.00 for the blanket shipped to any of the 50 States.

Edison, NJ
rider1454 at aol.com

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. Pins are 0.984”. Appriximately 6cc valve reliefs.

These pistons can be used in aftermarket race blocks or stock 360/5.9 magnum engine blocks.

Price is $475 shipped in the lower 48 states. I will ship elsewhere for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

727 caster stands for big block bolt pattern. I made a few sets of these for some racer friends who wanted a way to store their spare BB 727. The stands bolt on to the front and the trans mount. I used a 5 inch caster on the ones I made but a smaller caster would support the weight and still be easy to roll around. Asking $40 for a set of stands. This includes shipping but does not include the casters. I'm just selling the stands, you'll have to source the casters on your end. PM me on the board, PayPal preferred for payment. I have 3 or 4 sets of these left at the moment. I don't plan to make anymore of them.

Mopar Small Block Harland Sharp Roller Rocker Arm Package


1.5 Ratio Intake and Exhaust


Complete with thick wall shafts and shaft supports. A few extra rocker arms (not shown) are included as well!


550.00 plus shipping. PayPal preferred, SOLD! SOLD! SOLD!


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

Mopar Big-Block RB main bearing sets. Both sets were installed bearing clearances checked and removed. PM me here if interested.

-Clevite MS-1795 V - Standard bearing size, $75 shipped
-King MB5116HP 001 - .001 undersize Standard bearing size $75 Shipped

New JW performance 8 bolt 80013 crank adapter. 80 dollars shipped in the lower 48. Contact me here. Thanks

SOLD

Direct Connection P4529751 Race Flex Plate

6-Bolt Crank Mounting

For race converters only with large bolt mounting.

Brand new!

40.00 plus shipping. PayPal preferred.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cell/Text

Direct Connection Phenolic Thermoquad Carb Spacer

5/16" Thick

I have 4 available at 25.00 each plus shipping.

PayPal preferred.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cell/Text

Harland Sharp Roller Rocker Arm Package for Small Block Mopar (8 pcs.)

1.6 Ratio to increase your valve lift over standard 1.5 ratio.

Typically used on the intake side to better fill the cylinders.

Good used.

125.00 plus shipping. PayPal preferred. SOLD! SOLD! SOLD!

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cell/Text

ASSORTED RACE PARTS

* Mallory 29246 / 3500M 500 GPH Fuel Filter assembly, dual 3/4" x 16 (#8AN) inlets and outlets, 40 micron filter element (Mallory 29239) - $120.00

* Mopar Perf. P4529751AB race flex plate NEW, expired SFI tag - $65.00

* Altronics PerformAIRE Eclipse Weather Stations PAE - Used - $275.00

* EXTECH 45118 Mini Thermo-Anemometer (temp. & wind velocity) used - $50.00

* Moroso 74102 Battery disconnect switch. Rated 300 amps continuous, new.. - $60.00

* Taylor 21540 1/0 gauge 20' battery cable w/top post clamps on both ends. Red silicone insulation, new. (Misc.hardware not included.) - $90.00

* Summit G1201 Stainless steel battery tray, new. (Not NHRA legal.) - $25.00

* Autometer 3232 Gauge Panel, Aluminum, Black, Two 2 5/8 in. Holes, Universal, $18.00

* Powermaster 8163 75 amp single wire race mini-alternator, NEW. Requires pulley for your application. new. - $220.00

* Powermaster 9513 XS Torque Mopar small/big block mini-starter, NEW, Requires 9513-09 clockable adapter to help clear custom oil pans, headers, etc.. - $170.00

All prices plus shipping.

All parts shipped from Florida 32117

Sorry, no PayPal

locomo@bellsouth.net

These are virgin Brodix castings, similar to the D-6 heads from Chrysler, 11/32 guides, no valve job or port work ever.

$2500

PM here for more info or pics

NEW Hamburger custom aluminum drag race oil pan for SB Mopar 318-340 chassis car, dragster or ? Flat bottom pan 8" rear & 6-1/2" front depth. Right side kick-out, Teflon coated windage screen and coated insides. 12AN bung for pan heater (or plug it), return line bung in front of pan for adjustable regulator (or plug it) and full width twin trap doors. Built by the original Hamburger Pans in early 90's. Has never been bolted on an engine. Includes oil pump pick-up. **** $600 + shipping.

NEW Stefs 6770 oil pan heater, 12AN with 3 ft cord. 195 watt 110/120 volt. $90

5.25" billet aluminum crank pulley modified to fit Mopar dampner. Uses 3 of 6 dampner bolts. $75

Rebuilt set of Comp Cams roller lifters for SB Mopar #828-16. Has 2 New pair, the rest rebuilt. Not run since rebuilt. $450

Meziere SB Mopar black water pump with 1.50" lower hose fitting. $350

Weber Machine Belt Drive for SB Mopar with NEW belt ($160) and billet timing tab for 7" balancer. Was used on 9.5" block but may fit others. $1100

Custom made water pump spacers 1-3/4" thick for belt drive and electric water pump $90 negotiable with belt purchase

ATI Super Damper 917400E for SB Mopar. 7.074" OD with aluminum shell and steel hub, internal balance. May need ATI 916370 .093" spacer. $250

MSD 8633 flying magnet crank trigger kit for SB Mopar 7.25" OD. $340

All parts plus shipping from 56007



Most used parts have only 6 or 7 years of occasional racing.


Email for more pix. GTX5877@yahoo.com or PM

More pix

Mopar LA Small Block Cylinder Heads

Very desirable "308" castings prepared for NHRA Super Stock. Perfectly suitable for brackets as well!

CC volumes are approximately 65.0

1.88 intake valves/1.60 exhaust valves. Fresh valve job.

Rocker stands machined for shaft supports. Pushrod holes enlarged.


2200.00 plus shipping. PayPal preferred. SOLD! SOLD! SOLD!


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text