Does anyone know if Bobs Pro Fab is still building front suspensions? I found a Bobs Pro Fab on facebook but not sure if its the same one who used to be here on moparts. I believe he advertised on here with a Duster pulling a wheelie with Bobs Pro Fab on the k-member.

he wont talk to me on facebook.i wanted to order one.wouldnt talk to me

He doesn't build them anymore.

Contact Tory Shellehamer on Facebook , he makes a nice tubular K . Reasonable pricing , but you do have to wait for it . Well worth it . It is a quality part and good guy to work with

Tory's work is awesome. Cool guy as well.

That is the route I would go as well. I had planned go that route over the winter then I got derailed and bought a 6.4 Hemi I might never use

I have an Alterkation on the wagon , its ok but, for the price there is nicer ones on the market


http://www.moparsuspension.com/torsion-bar-eliminator.html the HDK one looks nice


I put a Gerst on the 67 before he sold out to QA1 ..its really nice and Carl was great to deal with

A friend of mine has an HDK on his 68 Barracuda. It is an older unit but it has very little travel in the front suspension, the car sits nice and drives nice but has very little up travel left even at the low ride height. I believe that has changed now but its worth double checking.

Didn't HOLT build some??

Holt has converted some SS/AH cars over to R&P, now that it's legal. Slightly different, as they must still retain the factory torsion bars.

I have Tory Shellhammers setup on my car. It's a drag only suspension IMO. I don't think he intended it to be street driven if that is a possibility.

Do they use a press or screw in lower ball joint typically?

Bondo retired from working on other folks cars to focus on his own projects.

QA1 has nice bolt in K-members now.

But Brad won Drag Week using it…… there is that!

Thank you all for your input. Its very much appreciated.