325/50/15 in a stock duster wheel well? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 325/50/15 in a stock duster wheel well?

Print Thread

325/50/15 in a stock duster wheel well? #311617 05/08/09 12:17 PM 05/08/09 12:17 PM
Joined: Jul 2006 Posts: 609 a cornfield near you B BlakDak OP mopar
BlakDak OP mopar B Joined: Jul 2006 Posts: 609 a cornfield near you	yes or no? what rim and back spacing if it does?

Re: 325/50/15 in a stock duster wheel well? [Re: BlakDak] #311618 05/08/09 01:13 PM 05/08/09 01:13 PM
Joined: Jan 2003 Posts: 945 La Vernia, Texas Pat7272 super stock
Pat7272 super stock Joined: Jan 2003 Posts: 945 La Vernia, Texas	bump, id like to know too

Re: 325/50/15 in a stock duster wheel well? [Re: BlakDak] #311619 05/08/09 03:30 PM 05/08/09 03:30 PM
Joined: Feb 2007 Posts: 5,080 organ M maximum entropy master
maximum entropy master M Joined: Feb 2007 Posts: 5,080 organ	i tried. with the springs in the stock location, 275s were the absolute limit on my scamp. perfectly centered, and almost touching everything! for what is the good life if not doing things thoughtfully?

Re: 325/50/15 in a stock duster wheel well? [Re: maximum entropy] #311620 05/08/09 03:36 PM 05/08/09 03:36 PM
A Anonymous Unregistered
Anonymous Unregistered A	Scamps have flat quarters where Dusters have bulged. I've never tried that large of a tire, though.

Re: 325/50/15 in a stock duster wheel well? #311621 05/08/09 04:58 PM 05/08/09 04:58 PM
Joined: Nov 2004 Posts: 8,094 Sunnyvale, CA Jeepmon master
Jeepmon master Joined: Nov 2004 Posts: 8,094 Sunnyvale, CA	73 Duster, 295-50-15 on 10" wheels with 4.0 back spacing and then 8" wheels with 3.5 back spacing, both would rub with passengers in the back seat. 73 Duster 360 stroker http://www.cardomain.com/ride/2594657

Re: 325/50/15 in a stock duster wheel well? [Re: Jeepmon] #311622 05/08/09 06:16 PM 05/08/09 06:16 PM
Joined: Oct 2004 Posts: 6,293 Northeast, Alpine, NY 9 9 Sec Phill On a road near you
9 Sec Phill On a road near you 9 Joined: Oct 2004 Posts: 6,293 Northeast, Alpine, NY	I use to run 325/50/15s under the old cuda, springs in stock location with stock 83/4 with ME axels...Heres a pic...rims were 10" with 4.5" offset....Phill 5216649-DSC02438.JPG (98 downloads)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1