Re: need exhaust card for 70 charger 426
[Re: ogopogo]
#3026789
03/23/22 02:34 PM
03/23/22 02:34 PM
|
Joined: Jan 2003
Posts: 5,127 Chicago Blackhawks
hemicar1971
master
|
master
Joined: Jan 2003
Posts: 5,127
Chicago Blackhawks
|
Since it says BC try an old Speedy Muffler Shop one that might still have cards. I had Speedy bend me up the A12 Exhaust in my car a long time ago using a Card.
Last edited by hemicar1971; 03/23/22 02:35 PM.
1971 HEMI E BODY REGISTRY
|
|
|
Re: need exhaust card for 70 charger 426
[Re: ogopogo]
#3026937
03/23/22 11:05 PM
03/23/22 11:05 PM
|
Joined: Jan 2003
Posts: 8,451 Highland, MI.
Sunroofcuda
master
|
master
Joined: Jan 2003
Posts: 8,451
Highland, MI.
|
Just go to a good exhaust shop & have them custom-bend a system. An experienced installer does not need bend cards.
No Man With A Good Car Needs To Be Justified
|
|
|
Re: need exhaust card for 70 charger 426
[Re: Sunroofcuda]
#3027032
03/24/22 10:53 AM
03/24/22 10:53 AM
|
Joined: Oct 2003
Posts: 1,801 BC Canada
ogopogo
OP
top fuel
|
OP
top fuel
Joined: Oct 2003
Posts: 1,801
BC Canada
|
good exhaust shop....thats funny !! the local midas has a dust covered bender but nobody knows how to use it,all the work ive seen is awefull and overpriced.i found a guy who closed his shop in the 90s but still has a bender in his home shop....the exhaust card would help him as he was never a fulltime exhaust guy but a general automotive shop back in the day.Kinda neat he kept all his equipment and parts stock and took it all home. exhaust work,just like polishing radiator work chroming etc etc is all dying out ....I was just recently quoted $1400 to recore a 956 rad,basic dual exhaust systems are like $1600 and they want the car for several days,its clown world.........
I plan to work with my new friend local guy for my exhaust systems from now on....its not rocket science,I worked full time at a muffler shop as a teenager but that was 30 yrs ago :-)
Last edited by ogopogo; 03/24/22 10:56 AM.
|
|
|
Re: need exhaust card for 70 charger 426
[Re: burdar]
#3027094
03/24/22 02:20 PM
03/24/22 02:20 PM
|
Joined: Jan 2003
Posts: 5,127 Chicago Blackhawks
hemicar1971
master
|
master
Joined: Jan 2003
Posts: 5,127
Chicago Blackhawks
|
I was thinking that some one must of up loaded all the cards to the internet. I will ask at my local Muffle Shop, but at they were starting to get the pipes ordered in from Walker years ago. The system was split up more than what the factory was doing.
1971 HEMI E BODY REGISTRY
|
|
|
Re: need exhaust card for 70 charger 426
[Re: hemicar1971]
#3027170
03/24/22 06:50 PM
03/24/22 06:50 PM
|
Joined: Dec 2014
Posts: 6,229 ohio
ruderunner
master
|
master
Joined: Dec 2014
Posts: 6,229
ohio
|
I have a set of cards BUT. I don't have the master catalog for them.
I think the collection covers 50s through 70s domestic. Cards have brief descriptions on them for YMM. often no engine or which pipe it is.
I think I'm going to pack them in the camper and spend a long weekend drinking beer and organizing the cards.
Angry white pureblood male
|
|
|
Re: need exhaust card for 70 charger 426
[Re: ogopogo]
#3027171
03/24/22 06:50 PM
03/24/22 06:50 PM
|
Joined: Oct 2005
Posts: 5,003 WI
Dcuda69
master
|
master
Joined: Oct 2005
Posts: 5,003
WI
|
Anyone have access to original exhaust cards/? I need a copy of the card for 1970 charger 426 hemi,gonna have a local guy bend me a stock exhaust soon ..thanks! I'm confused? Why have someone bend exhaust for the car? Nobody has pipes available for a 70 Charger? Most pre-bent stuff looks and fits better than something some guy squashed with a bender?
Last edited by Dcuda69; 03/24/22 06:54 PM.
|
|
|
Re: need exhaust card for 70 charger 426
[Re: Dcuda69]
#3027195
03/24/22 07:28 PM
03/24/22 07:28 PM
|
Joined: Jan 2003
Posts: 1,203
MoreParts
pro stock
|
pro stock
Joined: Jan 2003
Posts: 1,203
|
Anyone have access to original exhaust cards/? I need a copy of the card for 1970 charger 426 hemi,gonna have a local guy bend me a stock exhaust soon ..thanks! I'm confused? Why have someone bend exhaust for the car? Nobody has pipes available for a 70 Charger? Most pre-bent stuff looks and fits better than something some guy squashed with a bender? I agree. I bought a Gardner system for one of my cars 20 years ago and it fit dead nuts perfect. The pipes are aluminized inside and out so it's a one time purchase. They're on the more expensive side, but it really is a ou get what you pay for scenario. https://www.gardnerexhaust.com/exhaust-systems/mopar/1970-mopar-b-body-hemi-exhaust-system/
|
|
|
Re: need exhaust card for 70 charger 426
[Re: MoreParts]
#3027199
03/24/22 07:35 PM
03/24/22 07:35 PM
|
Joined: May 2019
Posts: 6,497 nowhere
Sniper
master
|
master
Joined: May 2019
Posts: 6,497
nowhere
|
Anyone have access to original exhaust cards/? I need a copy of the card for 1970 charger 426 hemi,gonna have a local guy bend me a stock exhaust soon ..thanks! I'm confused? Why have someone bend exhaust for the car? Nobody has pipes available for a 70 Charger? Most pre-bent stuff looks and fits better than something some guy squashed with a bender? I agree. I bought a Gardner system for one of my cars 20 years ago and it fit dead nuts perfect. The pipes are aluminized inside and out so it's a one time purchase. They're on the more expensive side, but it really is a ou get what you pay for scenario. https://www.gardnerexhaust.com/exhaust-systems/mopar/1970-mopar-b-body-hemi-exhaust-system/ Not everyone is into spending stupid money on a resto exhaust system and any place that tells you to call for pricing is going to be stupid money. Some of us just want an exhaust system that works without being a resto or race setup.
|
|
|
Re: need exhaust card for 70 charger 426
[Re: Sniper]
#3027208
03/24/22 08:22 PM
03/24/22 08:22 PM
|
Joined: Oct 2005
Posts: 5,003 WI
Dcuda69
master
|
master
Joined: Oct 2005
Posts: 5,003
WI
|
Anyone have access to original exhaust cards/? I need a copy of the card for 1970 charger 426 hemi,gonna have a local guy bend me a stock exhaust soon ..thanks! I'm confused? Why have someone bend exhaust for the car? Nobody has pipes available for a 70 Charger? Most pre-bent stuff looks and fits better than something some guy squashed with a bender? I agree. I bought a Gardner system for one of my cars 20 years ago and it fit dead nuts perfect. The pipes are aluminized inside and out so it's a one time purchase. They're on the more expensive side, but it really is a ou get what you pay for scenario. https://www.gardnerexhaust.com/exhaust-systems/mopar/1970-mopar-b-body-hemi-exhaust-system/ Not everyone is into spending stupid money on a resto exhaust system and any place that tells you to call for pricing is going to be stupid money. Some of us just want an exhaust system that works without being a resto or race setup. While I agree....he is doing a 70 Hemi Charger.......so define stupid money?
|
|
|
Re: need exhaust card for 70 charger 426
[Re: ruderunner]
#3027771
03/26/22 01:56 PM
03/26/22 01:56 PM
|
Joined: Jan 2003
Posts: 15,829 Omaha Ne
TJP
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 15,829
Omaha Ne
|
I have a set of cards BUT. I don't have the master catalog for them.
I think the collection covers 50s through 70s domestic. Cards have brief descriptions on them for YMM. often no engine or which pipe it is.
I think I'm going to pack them in the camper and spend a long weekend drinking beer and organizing the cards. Same here, mine go from 20,000 series up to 60,000. They seem to reference off of a "gorelig" number? (spelling may not be correct). Mine reference other Mfr's part Numbers like walker, marmont etc on the cards. but the master catalog appears to be the key to finding the correct card
|
|
|
Re: need exhaust card for 70 charger 426
[Re: Dcuda69]
#3027783
03/26/22 03:03 PM
03/26/22 03:03 PM
|
Joined: May 2019
Posts: 6,497 nowhere
Sniper
master
|
master
Joined: May 2019
Posts: 6,497
nowhere
|
While I agree....he is doing a 70 Hemi Charger.......so define stupid money?
The kind of money they ask for Hemi resto stuff. Depending on how you configure it, AccurateLTD charges $2k. I assume, I know, that if he was looking for the most correct resto type exhaust system he's of asked that and not for the card so a friend can bend up a replacement system for him.
|
|
|
Re: need exhaust card for 70 charger 426
[Re: ogopogo]
#3028396
03/28/22 03:32 PM
03/28/22 03:32 PM
|
Joined: Jan 2003
Posts: 5,127 Chicago Blackhawks
hemicar1971
master
|
master
Joined: Jan 2003
Posts: 5,127
Chicago Blackhawks
|
I also bought H Pipes off Walker in my day for an A12, Speedy Muffler bent every thing else up off their cards. I think I used the Hemi Mufflers and bought them off the dealership. There are left and right pipes that are not H pipes but never used them before. I also have a Stainless Steel Hemi Cuda H Pipe and if you want things to last a long time spend some extra money, maybe not the stainless steel way but good think wall pipes. Check around maybe there is old stock at Walker or CT or Midas in BC or Alberta.
1971 HEMI E BODY REGISTRY
|
|
|
Re: need exhaust card for 70 charger 426
[Re: TJP]
#3028402
03/28/22 03:45 PM
03/28/22 03:45 PM
|
Joined: Jan 2003
Posts: 8,451 Highland, MI.
Sunroofcuda
master
|
master
Joined: Jan 2003
Posts: 8,451
Highland, MI.
|
I have a set of cards BUT. I don't have the master catalog for them.
I think the collection covers 50s through 70s domestic. Cards have brief descriptions on them for YMM. often no engine or which pipe it is.
I think I'm going to pack them in the camper and spend a long weekend drinking beer and organizing the cards. Same here, mine go from 20,000 series up to 60,000. They seem to reference off of a "gorelig" number? (spelling may not be correct). Mine reference other Mfr's part Numbers like walker, marmont etc on the cards. but the master catalog appears to be the key to finding the correct card It's Goerlichs. They are now A-P Exhaust out of NC. Goerlichs is defunct.
No Man With A Good Car Needs To Be Justified
|
|
|
Re: need exhaust card for 70 charger 426
[Re: Sunroofcuda]
#3028507
03/28/22 09:50 PM
03/28/22 09:50 PM
|
Joined: Jan 2003
Posts: 15,829 Omaha Ne
TJP
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 15,829
Omaha Ne
|
I have a set of cards BUT. I don't have the master catalog for them.
I think the collection covers 50s through 70s domestic. Cards have brief descriptions on them for YMM. often no engine or which pipe it is.
I think I'm going to pack them in the camper and spend a long weekend drinking beer and organizing the cards. Same here, mine go from 20,000 series up to 60,000. They seem to reference off of a "gorelig" number? (spelling may not be correct). Mine reference other Mfr's part Numbers like walker, marmont etc on the cards. but the master catalog appears to be the key to finding the correct card It's Goerlichs. They are now A-P Exhaust out of NC. Goerlichs is defunct. Any idea where to get a "master list" or book for the cards? mice to ahve the cards but almost useless with knowing which series/ card # to look at for an application ?
|
|
|
Need pics of original HEMI mufflers with date codes
[Re: TJP]
#3034247
04/16/22 09:15 PM
04/16/22 09:15 PM
|
Joined: Jul 2007
Posts: 36 MN
36viper
member
|
member
Joined: Jul 2007
Posts: 36
MN
|
HELP WANTED: I have been talking with Scott from ECS Exhaust Co.. He is willing to create full factory correct exhaust systems for '68 HEMI B bodies, but he needs to see one or more original '68 HEMI muffler(s) and get the date code(s). He does have '69 HEMI B body date coded July '68 exhaust systems. His systems carry the Pentastar. I already sent him pics of an original '68 HEMI resonator (attached) , but he also needs HEMI MUFFLER date codes. My friend's HEMI resonator has a date code of 2447....the 244th day of 1967 (August). It came on an early '68 HEMI Charger (Jan '68 build date). Any help finding this info. would help me and many future resotrations!!
Thank you Moparts for the help!
|
|
|
Re: Need pics of original HEMI mufflers with date codes
[Re: 36viper]
#3034366
04/17/22 11:44 AM
04/17/22 11:44 AM
|
Joined: Jan 2003
Posts: 8,451 Highland, MI.
Sunroofcuda
master
|
master
Joined: Jan 2003
Posts: 8,451
Highland, MI.
|
Going to be a challenge to find date-coded resonators & mufflers. I can help you with 4" round resonators with 2.5" necks & cores - plus they have spun-locked heads just like in your photo. I installed them on my old '73 Charger Rallye. See photo below.
No Man With A Good Car Needs To Be Justified
|
|
|
Re: Need pics of original HEMI mufflers with date codes
[Re: Sunroofcuda]
#3035613
04/21/22 07:56 AM
04/21/22 07:56 AM
|
Joined: Jul 2007
Posts: 36 MN
36viper
member
|
member
Joined: Jul 2007
Posts: 36
MN
|
Thanks Sunroofcuda! Those resonators look great. I'm still looking, but will keep you in mind for those sweet resonators!!
Thank you Moparts for the help!
|
|
|
|
|