BB Truck Manifolds
#2904004
03/29/21 01:37 PM
03/29/21 01:37 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
1983 D series with a big block. What are the options for BB headers. I was hoping Bouchillon had something but they are out, and not sure if they will get any more in. Tks.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: BB Truck Manifolds
[Re: CompWedgeEngines]
#2904533
03/31/21 10:27 AM
03/31/21 10:27 AM
|
Joined: May 2003
Posts: 15,487 Florida
scratchnfotraction
I Live Here
|
I Live Here
Joined: May 2003
Posts: 15,487
Florida
|
I have a 88 d100 & 86 w150 both have 440 engines and I run 2 sets of the hedman 79250.
nice fit & work 2x or 4x4 chassis.
has ball cone collectors so no gasket down low to blow out. lots of room for a mini starter and tubes are not below frame rails (well the 1 collector bolt does hang a little lower than frame rail)
IIRC these are the same ones Bouchillon sells in the BB swap kit.
Last edited by scratchnfotraction; 03/31/21 10:27 AM.
|
|
|
Re: BB Truck Manifolds
[Re: scratchnfotraction]
#2905358
04/02/21 12:47 PM
04/02/21 12:47 PM
|
Joined: Feb 2005
Posts: 672 Wichita, KS
tmef
mopar
|
mopar
Joined: Feb 2005
Posts: 672
Wichita, KS
|
I have a 88 d100 & 86 w150 both have 440 engines and I run 2 sets of the hedman 79250.
nice fit & work 2x or 4x4 chassis.
has ball cone collectors so no gasket down low to blow out. lots of room for a mini starter and tubes are not below frame rails (well the 1 collector bolt does hang a little lower than frame rail)
IIRC these are the same ones Bouchillon sells in the BB swap kit.
I run the same headers in my 83. Fit great!
|
|
|
Re: BB Truck Manifolds
[Re: scratchnfotraction]
#2907168
04/06/21 09:11 AM
04/06/21 09:11 AM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: BB Truck Manifolds
[Re: tmef]
#2907169
04/06/21 09:11 AM
04/06/21 09:11 AM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
|
|