Front End Shake in Shutdown Area - Update - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Front End Shake in Shutdown Area - Update

Print Thread

Page 2 of 2

1

2

Re: Front End Shake in Shutdown Area - Update [Re: Tig] #2904079 03/29/21 07:37 PM 03/29/21 07:37 PM
Joined: May 2007 Posts: 1,443 Maryland D Dads426 OP pro stock
Dads426 OP pro stock D Joined: May 2007 Posts: 1,443 Maryland	Originally Posted by Tig We flipped the Tie rod ends (inner) to improve bump steer, using a couple of the bushes we got from a guy on here.] We could try this. We have the MR2 bushings in the tie rod ends, idler arm and pitman arm. Thanks for the tip. 2012 422 Allstars NSS Champion 2013 422 Allstars NSS Champion 2014 422 Allstars NSS Champion

Re: Front End Shake in Shutdown Area - Update [Re: Dads426] #2904185 03/30/21 05:28 AM 03/30/21 05:28 AM
Joined: May 2016 Posts: 630 Ct W Wirenut mopar
Wirenut mopar W Joined: May 2016 Posts: 630 Ct	Did raising the front end that much effect travel on the launch ?

Re: Front End Shake in Shutdown Area - Update [Re: 440Jim] #2904258 03/30/21 11:22 AM 03/30/21 11:22 AM
Joined: Jan 2003 Posts: 19,363 Las Vegas Al_Alguire I Live Here
Al_Alguire I Live Here Joined: Jan 2003 Posts: 19,363 Las Vegas	Lots of ways to further correct that bumpsteer you have. "I am not ashamed to confess I am ignorant of what I do not know." "It's never wrong to do the right thing"

Re: Front End Shake in Shutdown Area - Update [Re: Wirenut] #2905125 04/01/21 10:20 PM 04/01/21 10:20 PM
Joined: May 2007 Posts: 1,443 Maryland D Dads426 OP pro stock
Dads426 OP pro stock D Joined: May 2007 Posts: 1,443 Maryland	Originally Posted by Wirenut Did raising the front end that much effect travel on the launch ? It still hooked up OK, 1.39 60', but very little front end travel, barley lifted the wheels. 2012 422 Allstars NSS Champion 2013 422 Allstars NSS Champion 2014 422 Allstars NSS Champion

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1