Good Moring Everyone,

I recently purchased a 4 speed kit from Brewers for a 1968 Roadrunner. Does anyone have a diagram
that shows where everything goes? I just want to double check everything before I install the engine/trans
together.

The car originally came with a 4 speed, so I won't need to change anything on the car. Just need to know
how everything bolts up to the engine.

I did do a search on the internet but could not find anything clear.

Thanks in advance!!
Jim

My first thought would be to get a parts book for your car and look at the illustrations.

If you drop that much coin with Brewers I’m sure they’ve got a layout they can send you.

Factory service manual has quite a few drawings that will help. Plus the procedure to center the bellhousing which you nee to do unless the housing is the one that came with the engine.

(Free) Downloadable Parts and Service Manuals available here. Additional goodies if you poke around.

http://www.mymopar.com/index.php?pid=31

Look at the Direct Connection Clutch & Manual Transmission Racing Bulletin
here:
http://www.mymopar.com/index.php?pid=22