My '71 Dart GT is wearing 14" X 5 1/2" (small bolt pattern) factory Rallyes up front and will be wearing 15" X 7" (also small bolt pattern) WheelVintiques Rallyes on the rear. I'm looking for matching chromed/polished (NOT BRUSHED) trim rings to fit. Who's products have you used?

Your best bet is probably the trim rings Wheel Vintiques offers:

https://www.wheelvintiques.com/accessories/trim-rings.html

Factory 14 inch trim rings were brushed but you want polished for the front so these should be what you're looking for:

https://www.wheelvintiques.com/accessories/trim-rings/14x6-oem-style-rounded-lip-trim-ring.html

For the rear, these should work:

https://www.wheelvintiques.com/accessories/trim-rings/7-o-e-m-style-trim-ring.html

Mike.

You are probably not going to find an exact match. Mopars always use a stepped edge ring , never a smooth ring. Also the 15 inch version
used a small dime sized valve stem hole. The 14 inch used a much larger valve stem hole , rounded top and bottom , straight on the sides.
I have a couple 14 inch polished rings , but they dont match the polished 15 inch rings the Coker has , valve stem hole is different.
As I say an exact match , probably not, close , maybe.

Frank