Re: Rough & tumble 68 Charger-6.1L and A518
[Re: larry4406]
#2585806
12/01/18 07:55 PM
12/01/18 07:55 PM
|
Joined: Dec 2013
Posts: 4,804 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,804
Wichita
|
Wow, had not seen the car taken down this far!
'63 Dodge 330
11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
9.92 @ 135mph with a 350 shot of nitrous and 93 octane pump. 1.43 60 ft. 3,750 lbs.
|
|
|
Re: Rough & tumble 68 Charger-6.1L and A518
[Re: 70B5Cuda]
#2820421
09/13/20 09:40 PM
09/13/20 09:40 PM
|
Superfreak
Unregistered
|
Superfreak
Unregistered
|
Lots of work going on there.
|
|
|
Re: Rough & tumble 68 Charger-6.1L and A518
[Re: ]
#2821178
09/15/20 05:02 PM
09/15/20 05:02 PM
|
Joined: Jul 2009
Posts: 1,073 Newton, KS
70B5Cuda
OP
super stock
|
OP
super stock
Joined: Jul 2009
Posts: 1,073
Newton, KS
|
Lots of work going on there. Thanks! Windshield wiper motor notch is gone...
1970 Barracuda B5 6.1 Hemi/6 speed 1969 Charger survivor in R6 383/727-wrecked 12/24/18 1968 Charger in original burgundy paint "Ribeye" 1968 Charger w/ 6.1L, TR-6060, 9" 1968 Roadrunner w/ 6.1L/6 speed 2011 Dodge Ram w/ 6.7L
|
|
|
Re: Rough & tumble 68 Charger-6.1L and A518
[Re: 70B5Cuda]
#2825504
09/27/20 12:09 AM
09/27/20 12:09 AM
|
Superfreak
Unregistered
|
Superfreak
Unregistered
|
The wheel houses were done very nicely. See a lot of guys doing it but cutting the piece all to sh it and welding pieces here and there to make it work.
|
|
|
Re: Rough & tumble 68 Charger-6.1L and A518
[Re: ]
#2826272
09/28/20 09:31 PM
09/28/20 09:31 PM
|
Joined: Jul 2009
Posts: 1,073 Newton, KS
70B5Cuda
OP
super stock
|
OP
super stock
Joined: Jul 2009
Posts: 1,073
Newton, KS
|
The wheel houses were done very nicely. See a lot of guys doing it but cutting the piece all to sh it and welding pieces here and there to make it work. Thanks!
1970 Barracuda B5 6.1 Hemi/6 speed 1969 Charger survivor in R6 383/727-wrecked 12/24/18 1968 Charger in original burgundy paint "Ribeye" 1968 Charger w/ 6.1L, TR-6060, 9" 1968 Roadrunner w/ 6.1L/6 speed 2011 Dodge Ram w/ 6.7L
|
|
|
Re: Rough & tumble 68 Charger-6.1L and A518
[Re: 70B5Cuda]
#2826581
09/29/20 07:03 PM
09/29/20 07:03 PM
|
Joined: Jul 2009
Posts: 1,073 Newton, KS
70B5Cuda
OP
super stock
|
OP
super stock
Joined: Jul 2009
Posts: 1,073
Newton, KS
|
Firewall is in place...also the 6.4L BGE Hemi and the TR6060 were mated and installed for mockup of the transmission crossmember. A front lower radiator support was built since I'm not a fan of some of the other aftermarket offerings. It's got a pocket on the passenger side to account for the vintage air conditioning condenser/hard lines.
Last edited by 70B5Cuda; 09/29/20 07:05 PM.
1970 Barracuda B5 6.1 Hemi/6 speed 1969 Charger survivor in R6 383/727-wrecked 12/24/18 1968 Charger in original burgundy paint "Ribeye" 1968 Charger w/ 6.1L, TR-6060, 9" 1968 Roadrunner w/ 6.1L/6 speed 2011 Dodge Ram w/ 6.7L
|
|
|
|
|