RB valley cover plate? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech RB valley cover plate?

Print Thread

RB valley cover plate? #2825173 09/25/20 10:11 PM 09/25/20 10:11 PM
Joined: Aug 2009 Posts: 2,039 Mooresburg, Tn ' '72CudaRacer OP top fuel
'72CudaRacer OP top fuel ' Joined: Aug 2009 Posts: 2,039 Mooresburg, Tn	Does anyone offer a valley plate/cover for a RB with Edelbrock RPM heads that is similar to Indys that has a removeable center plate? (to access lifters & push rods w/ the heads still on) Thanks, Brian

Re: RB valley cover plate? [Re: '72CudaRacer] #2825184 09/25/20 10:44 PM 09/25/20 10:44 PM
Joined: Feb 2005 Posts: 20,159 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,159 PA.	Check with Andy to see if his plate will work. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: RB valley cover plate? [Re: '72CudaRacer] #2825197 09/26/20 12:39 AM 09/26/20 12:39 AM
Joined: Jan 2003 Posts: 30,995 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 30,995 Oregon	RPM heads don't overlap the valley plate so a solid plate works just fine.

Re: RB valley cover plate? [Re: AndyF] #2825514 09/27/20 01:00 AM 09/27/20 01:00 AM
Joined: Mar 2009 Posts: 2,458 Sydney,Australia tex013 top fuel
tex013 top fuel Joined: Mar 2009 Posts: 2,458 Sydney,Australia	Trickflow do a plate lkke you want . I used it with 440 source heads BUT used Andys batwing side plates . Have it now with TFlow 270 heads , no side plates needed Tex New best ET 10.259@129.65 . New best MPH 130.32 Finally fitted a solid cam, stepped it up a bit more 3690lbs through the mufflers New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm Power by Tex's Automotive

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1