Posted By: '72CudaRacer
RB valley cover plate? - 09/26/20 02:11 AM
Does anyone offer a valley plate/cover for a RB with Edelbrock RPM heads that is similar to Indys that has a removeable center plate? (to access lifters & push rods w/ the heads still on)
Thanks, Brian
Check with Andy to see if his plate will work.
Posted By: AndyF
Re: RB valley cover plate? - 09/26/20 04:39 AM
RPM heads don't overlap the valley plate so a solid plate works just fine.
Posted By: tex013
Re: RB valley cover plate? - 09/27/20 05:00 AM
Trickflow do a plate lkke you want .
I used it with 440 source heads BUT used Andys batwing side plates .
Have it now with TFlow 270 heads , no side plates needed
Tex