|
Re: 360 Magnum 7/16" Rocker Stud Girdle?
[Re: LSP]
#2795439
07/11/20 12:37 PM
07/11/20 12:37 PM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
I have a Jomar with the 7/16" studs I'm not using, I went to Jesel shaft rockers.
Shoot me a PM if interested.
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
Re: 360 Magnum 7/16" Rocker Stud Girdle?
[Re: Adobedude]
#2795478
07/11/20 01:59 PM
07/11/20 01:59 PM
|
Joined: Mar 2007
Posts: 3,281 West Coast, USA
jbc426
master
|
master
Joined: Mar 2007
Posts: 3,281
West Coast, USA
|
I have a Jomar with the 7/16" studs I'm not using, I went to Jesel shaft rockers.
Shoot me a PM if interested. Why did you go for the upgrade to Jesel even with the Jomar girdle? Do you have any pictures of the Jesel shaft set-up installed?
1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's 1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)
|
|
|
Re: 360 Magnum 7/16" Rocker Stud Girdle?
[Re: jbc426]
#2795587
07/11/20 07:22 PM
07/11/20 07:22 PM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
I have a Jomar with the 7/16" studs I'm not using, I went to Jesel shaft rockers.
Shoot me a PM if interested. Why did you go for the upgrade to Jesel even with the Jomar girdle? Do you have any pictures of the Jesel shaft set-up installed? I just did, and the guy working on my heads, Shane Studley liked them. They are pretty pricey. I broke a couple 3/8" studs with the girdle, had Harland Sharp convert my rockers to 7/16, never another problem.
Last edited by Adobedude; 07/11/20 07:27 PM.
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
|
|
|