I have a customer that wants to go with the biggest possible wheel combo for the back of his 69 Charger. He wants to go with 295/50/15 BF Goodrich tires on 15"x 10" Crager SS. First question is would they fit (stock wheel wells) and if so, what would be the best back spacing?

Thanks!!
Jim

I was thinking of the same size for my Doba.
Also 15X10 with 4 inch back space wheels.
Anyone know the actual size of these in inches?

15x10 4 7/8 bs , will have to curl the outer lip.

325-50-15

295-50-15

I'm running BFG T/A 295/50/15 with 15x10 5" backspace with SS springs. No problems.

15x10 275

I'm running BFG T/A 295/50/15 with 15x10 5" backspace on my 68 charger lowered 1 inch still no problems
hope that helps

Thanks everyone!! Great looking cars too!!

Jim

hoosier 12.50 on 9" with 4.5 bs.
no lip moving, no rubbing.

You can fit a 12" wide rim in there but with that you are limited to running a tire that is no wider than the rim. The guys running a 10" wheel and a 295-50 surely notice the bulge of the tire runs wider than the rim.
I run a 18x10 with a 295-45 tire. My tire is wider than the rim but there is room for more. The problem is not just with fitment at a stand-still but during movement, up-down and cornering.
See the pictures and notice the unpainted, sorta shiny spots? That is where the tire has made contact at the outer wheel tub. Chrysler, in some strange reason, made these tubs with a strange shape. In a perfect world, the outer wheel tub would have followed the quarter panel contour to allow the wheel and tire to sit out almost flush to the edge. New cars are like this, it reduces air drag and improves fuel efficiency. In old cars, it would allow much wider tires to be used.

I am having trouble finding Crager S/S's 15" x 10" with a 5" backspacing. Anyone have any luck?

Thanks,
Jim