Well, yesterday I decided to do a little work on the Bee.

I had been having some trouble with the ignition system for awhile now..

Long story which I wont get into but I decided to remove the whole electronic ignition and go back to the original point ignition system temporarly.

Anyway I had 2 from the wires from the electronic distributor feed though 2 blank ports on the 3 speed wiper motor plug on the firewall block. Well I remove the 2 wires with no problems. So I decided to take a drive.. Great! Hey??? whats that smell? Oh Crap!!! So I pull the Bee back up in the driveway, open the hood and see smoke over on the drivers manifold. @$#**&%@^#!!!!!! I forgot to plug the wiper plug back in the firewall block!!! The wiper plug was melting on the manifold!

I really feel dumb!! Now, after I stopped saying some choice words in my driveway for all my neighbors to hear, I assesed the damage..

In looking at it, the plug is melted but the wires for the wiper are okay. Also the 2 black wires and funny looking 2 pronged plug for the neutral safety switch /reverse light are melted as well.

Anyone know where I could get these pieces to fix this? The blade connectors will just pop right out and go out into a replacement plug. But I have no idea whould have these pieces.

Man that totally sucks! I hope all the damage was limited to just this harness

Ooops! This looks like the bulk connector.
http://chargerspecialties.com/catalogstore.htm
http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=1
http://www.paddockparts.com/Paddock/prod...A69A1B06C54CFF8

dang I wish I would of saw this about three hours ago. I could of grabbed a connector housing from a parts car I was grabbing a manual steering box from. I almost grabbed the three speed wiper but I didnt. I would of just sent the connector to you. Dang

I have both.
Email me.
Jules