Mopar Performance R3 block
#2510479
06/19/18 07:04 PM
06/19/18 07:04 PM
|
Joined: Apr 2005
Posts: 1,189 Michigan
begood
OP
super stock
|
OP
super stock
Joined: Apr 2005
Posts: 1,189
Michigan
|
Does anyone know where I can find all the specs on an R3 block I just bought? It is part number P4332908.
THERE IS NO SUCH THING, AS TOO MUCH HORSEPOWER
|
|
|
Re: Mopar Performance R3 block
[Re: begood]
#2510481
06/19/18 07:12 PM
06/19/18 07:12 PM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
That doesn't really sound right....
Do you really mean casting number P4532908?
Rich H.
Esse Quam Videri
|
|
|
Re: Mopar Performance R3 block
[Re: begood]
#2510485
06/19/18 07:18 PM
06/19/18 07:18 PM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
(continued).....if it is really a P4532908 casting number, then you've got what started out as a 9.200 water block with 340 mains.
Lifter bore angle was generic/enough material cast into it to be machined either way.
It would normally have been machined into either P4876672 or P4876792 Marketing/MP catalog numbers. Those can be Googled pretty easily or start checking MP catalogs. No idea if they even make these anymore but I am guessing probably not...
Rich H.
Esse Quam Videri
|
|
|
Re: Mopar Performance R3 block
[Re: ZIPPY]
#2510486
06/19/18 07:19 PM
06/19/18 07:19 PM
|
Joined: Apr 2005
Posts: 1,189 Michigan
begood
OP
super stock
|
OP
super stock
Joined: Apr 2005
Posts: 1,189
Michigan
|
My mistake. Yes it is casting number P4532908.
THERE IS NO SUCH THING, AS TOO MUCH HORSEPOWER
|
|
|
Re: Mopar Performance R3 block
[Re: begood]
#2510487
06/19/18 07:22 PM
06/19/18 07:22 PM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
Oh OK, well there you go, hope that helps.
I'm not directly involved with that stuff anymore having moved on in 2013 but have posted on that casting number before, so the info was floating out there in cyberspace.
Good luck with it!
Rich H.
Esse Quam Videri
|
|
|
Re: Mopar Performance R3 block
[Re: ZIPPY]
#2510489
06/19/18 07:31 PM
06/19/18 07:31 PM
|
Joined: Apr 2005
Posts: 1,189 Michigan
begood
OP
super stock
|
OP
super stock
Joined: Apr 2005
Posts: 1,189
Michigan
|
It has 792 stamped on the front of the block, so I'm thinking it must be a P4876792 block.
THERE IS NO SUCH THING, AS TOO MUCH HORSEPOWER
|
|
|
Re: Mopar Performance R3 block
[Re: begood]
#2510492
06/19/18 07:34 PM
06/19/18 07:34 PM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
Makes sense. I think we figured it out.
Rich H.
Esse Quam Videri
|
|
|
Re: Mopar Performance R3 block
[Re: begood]
#2511466
06/21/18 07:49 PM
06/21/18 07:49 PM
|
Joined: Apr 2005
Posts: 1,189 Michigan
begood
OP
super stock
|
OP
super stock
Joined: Apr 2005
Posts: 1,189
Michigan
|
No, this one was not on racing junk. It has 59 degree lifter bore. A cam will not be a problem.
THERE IS NO SUCH THING, AS TOO MUCH HORSEPOWER
|
|
|
Re: Mopar Performance R3 block
[Re: begood]
#2511725
06/22/18 01:16 PM
06/22/18 01:16 PM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
There might be 340 replacement block coming out of mothballs to be sold soon. Priorities/thinning the hoard kind of a deal.
Rich H.
Esse Quam Videri
|
|
|
Re: Mopar Performance R3 block
[Re: scottb]
#2511954
06/22/18 11:13 PM
06/22/18 11:13 PM
|
Joined: Oct 2011
Posts: 3,036 bean town ....Ca
WHITEDART
master
|
master
Joined: Oct 2011
Posts: 3,036
bean town ....Ca
|
I hope it’s not a 9.200 deck block with the wrong lifter bores in it the cams are hard to come by and very expensive Brett Miller has one of those there is a fairly easy solution
In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb
|
|
|
|
|