Re: spray adhesive for intake gaskets
[Re: varunner]
#2501442
05/28/18 08:31 PM
05/28/18 08:31 PM
|
Joined: Jul 2011
Posts: 960 Chicago
PurpleBeeper
super stock
|
super stock
Joined: Jul 2011
Posts: 960
Chicago
|
Those gaskets used to come with a small tube of blue or green sealant and a little metal handled paint brush. It sure "looked" like Indian Head gasket sealer that comes in the little brown bottles (most part stores)
70 Roadrunner convt. street car
440+6, NOS, 4-spd, SS springs
'96 Mustang GT convt. street car
'04 4.6 SOHC, NOS, auto, lowered
"Officer, that button is for short on-ramps"
|
|
|
Re: spray adhesive for intake gaskets
[Re: R/T1968R/T]
#2501565
05/29/18 01:37 AM
05/29/18 01:37 AM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
Hi Tack red spray by permatex that was my old standby (thin/tacky/spray) but the last 2 spray cans of it, red globules came out in the spray. It does have a different can format that the old version of it. I did have some 3M spray (not sure if the # is the same as mentioned) but that stuff was wicked stout.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: spray adhesive for intake gaskets
[Re: varunner]
#2501623
05/29/18 10:28 AM
05/29/18 10:28 AM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
Gasketcinch on head side, red axle grease on the intake side, super stuck racers do it, they can pull an take and reuse the gaskets over and over....their engines get torn down all the time for rules verification.
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
Re: spray adhesive for intake gaskets
[Re: DaytonaTurbo]
#2501647
05/29/18 11:18 AM
05/29/18 11:18 AM
|
Joined: Dec 2007
Posts: 18,160 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,160
Mass
|
if this is for a big block valley pan, I install it without paper gaskets. The factory never used paper gaskets there. The OP might be doing a six pack manifold and needs the paper gaskets?
|
|
|
Re: spray adhesive for intake gaskets
[Re: Adobedude]
#2501698
05/29/18 12:39 PM
05/29/18 12:39 PM
|
Joined: Mar 2007
Posts: 3,287 West Coast, USA
jbc426
master
|
master
Joined: Mar 2007
Posts: 3,287
West Coast, USA
|
Gasketcinch on head side, red axle grease on the intake side, super stuck racers do it, they can pull an take and reuse the gaskets over and over....their engines get torn down all the time for rules verification. I like this idea, and am going to try it soon. Thanks!
1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's 1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)
|
|
|
|
|