Anybody out there with experience or thoughts on sending this intake to Wilson manifolds for plenum porting? It will be used with Monster MaxWedge Edelbrock/Hughes cnc'd heads on a 493 w/13.5 comp. Looking to decide wether it is worth the money for the return on power gain. Intake is already port matched. Thanks all.

I send all of my intakes to Wilson. Costs about $1000 for their complete pro package and the engine usually picks up about 20 hp.

Getting ready to do my own. So far just port matched. Gonna take the 4 leaf design out of it soon. Its what Wilson suggested last time i spoke with them. Just gonna square it up and blend into the runner and use a 4 hole tapped spacer, another thing they suggested.

Call Chad Speier.

Has Chad done any work on your intake and/or heads?

I have a set of heads here I traded out with Chad, RHS heads. Very nice work, the engine will be together soon.

Thanks for the feedback guys.Dave I'd really like to see pics of that intake when you are done with it. I'm sure many others would,too.Hope you will post some here for us to see. Thanks, Bill.