Re: How to support car with K frame/suspension removed
[Re: kbcuda]
#2455612
02/22/18 02:30 PM
02/22/18 02:30 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
if you located 4 wheels like those (shouldn't be too hard) maybe a welding shop could fab up some brackets for cheap.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: How to support car with K frame/suspension removed
[Re: kbcuda]
#2455722
02/22/18 05:47 PM
02/22/18 05:47 PM
|
Joined: Sep 2006
Posts: 1,147 Home of the Bluegrass
MoparJunkie
super stock
|
super stock
Joined: Sep 2006
Posts: 1,147
Home of the Bluegrass
|
How soon are you needing to borrow them? I have a set front/back but they are on the Superbee currently.... When it's done I'd be more than happy to let you borrow them. They are the US car tool set.
Last edited by 70HemiShaker; 02/22/18 05:47 PM.
"It takes a Mopar to catch a Mopar” 1971 Roadrunner FJ6 Sassy Grass 505"RB, 18 spline 4 speed, and Dana 60 with 3.54
|
|
|
Re: How to support car with K frame/suspension removed
[Re: njmopar]
#2455736
02/22/18 06:25 PM
02/22/18 06:25 PM
|
Joined: Feb 2003
Posts: 21,318 Manitoba, Canada
DaytonaTurbo
Too Many Posts
|
Too Many Posts
Joined: Feb 2003
Posts: 21,318
Manitoba, Canada
|
I would recommend pneumatic tires as it will allow you to roll over cracks or bumps much easier. Mine are about 10" in diameter For example the ramp up into the trailer, a solid wheel would have been really difficult to use. The guy that did my convertible top had a gravel drive, which also would have been impossible to move solid wheels on.
I used the casters like in the pic, the casters with the phenolic tires and they are actually pretty good. I've moved mine around on concrete, gravel, trailers, etc. There's not much weight once the front clip is off. I can lift the front of the car up in the air by hand.
|
|
|
Re: How to support car with K frame/suspension removed
[Re: MoparJunkie]
#2455764
02/22/18 07:12 PM
02/22/18 07:12 PM
|
Joined: Jan 2003
Posts: 1,945 roanoke va
kbcuda
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 1,945
roanoke va
|
How soon are you needing to borrow them? I have a set front/back but they are on the Superbee currently.... When it's done I'd be more than happy to let you borrow them. They are the US car tool set. Probably before next weekend....only would need the fronts..could someone provide the general size dimensions of the angle piece and the length of the vertical tube? I can drill the holes myself..
|
|
|
|
|