|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: MuuMuu101]
#2423022
12/24/17 09:13 AM
12/24/17 09:13 AM
|
Joined: Dec 2009
Posts: 21,192
in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 21,192
in a cattle trailer down by th...
|
First, did you try it to see if it works? I've never had to add oil to any cylinder either.
"Come get your wife"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion.
'74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Front and rear disc and hydroboost conversion.
2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: MuuMuu101]
#2423023
12/24/17 09:15 AM
12/24/17 09:15 AM
|
Joined: Dec 2009
Posts: 21,192
in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 21,192
in a cattle trailer down by th...
|
I'm not sure the cherry picker I have has had that plug for the last 5 years. A wrap around the ram with electrical tape and it's good to go.  I like the way you think.  Duct tape!
"Come get your wife"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion.
'74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Front and rear disc and hydroboost conversion.
2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: MuuMuu101]
#2423086
12/24/17 01:13 PM
12/24/17 01:13 PM
|
Joined: Jun 2005
Posts: 6,257
gulfport, ms, west mi
rowin4
master
|
master
Joined: Jun 2005
Posts: 6,257
gulfport, ms, west mi
|
I never had to ad oil to my cherry picker but to bottle jacks. The rubber plugs are difficult to get in but I have used a small screw driver to work it in. I have also lost the rubber plug upon removal , bing and it was gone forever. The duct tap method was used and has been on for years.
it's ok to butt heads, just don't do it with a butthead
|
|
|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: MuuMuu101]
#2425266
12/29/17 09:21 AM
12/29/17 09:21 AM
|
Joined: Dec 2006
Posts: 2,140
Byron, NY
W.I.N. Racing
top fuel
|
top fuel
Joined: Dec 2006
Posts: 2,140
Byron, NY
|
OMG... 
'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd
|
|
|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: Guitar Jones]
#2425362
12/29/17 01:36 PM
12/29/17 01:36 PM
|
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101
OP
I got lucky at Woodward!
|
OP
I got lucky at Woodward!
Joined: Dec 2010
Posts: 12,375
SoCal
|
First, did you try it to see if it works? I've never had to add oil to any cylinder either. Yes I did! Because of that I ended up reading the instructions which states, "Hyrdaulic Oil Not Included."
|
|
|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: mopars4ever]
#2425367
12/29/17 01:41 PM
12/29/17 01:41 PM
|
Joined: Feb 2005
Posts: 20,279
PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,279
PA.
|
Its really not that hard guys. A little lube and push it in.
1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.38@138.67
Livin and lovin life one day at a time
|
|
|
Re: Harbor Freight Engine Cherry Picker / Lifting an Engine
[Re: mopars4ever]
#2425370
12/29/17 01:48 PM
12/29/17 01:48 PM
|
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101
OP
I got lucky at Woodward!
|
OP
I got lucky at Woodward!
Joined: Dec 2010
Posts: 12,375
SoCal
|
Did the instructions say how to remove and install the rubber plug? LOL The instructions didn't even refer that the plug was the fill hole.
|
|
|
|
|
