Previous Thread
Next Thread
Print Thread
Page 1 of 4 1 2 3 4
Harland Sharp Rocker Sale Interest #2420308
12/18/17 01:51 PM
12/18/17 01:51 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
I am gauging the interest in running my Harland Sharp Rocker Sale again. I had done it annually for about 4 or 5 years, and haven't in the last couple, as I have just been too busy.I would simply like to get an idea, of how many people would SERIOUSLY be interested in buying a set of H/S rockers at this point.Its a lot of work on my end, so I need it to be worth my time so to speak.The pricing has always been about as good as you would ever get. I rarely go on the Question and Answer, but will post the same there, as I mostly know people from this Race side. Mods, if you could leave up a couple days, i would appreciate it. I will post on the deals section if it happens. Thank You Todd


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2420316
12/18/17 01:57 PM
12/18/17 01:57 PM
Joined: Jan 2003
Posts: 3,439
Northern N.J.
hemi_doug Offline
master
hemi_doug  Offline
master

Joined: Jan 2003
Posts: 3,439
Northern N.J.
I would be in for a set to use with Victor BB heads.



71 440-6 4spd & 69 Hemi 4spd
Re: Harland Sharp Rocker Sale Interest [Re: hemi_doug] #2420342
12/18/17 02:43 PM
12/18/17 02:43 PM
Joined: Sep 2017
Posts: 39
Kentucky
3
301v Offline
member
301v  Offline
member
3

Joined: Sep 2017
Posts: 39
Kentucky
Was getting ready to get another new set of T&Ds For the new heads but would go with harland sharpe for right deal.. Will be 440-1 heads.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2420358
12/18/17 03:20 PM
12/18/17 03:20 PM
Joined: Aug 2006
Posts: 1,613
Deerfield, Ohio
70dusterjohn Offline
top fuel
70dusterjohn  Offline
top fuel

Joined: Aug 2006
Posts: 1,613
Deerfield, Ohio
I’d be in for a set of 440-1 heads ..

Re: Harland Sharp Rocker Sale Interest [Re: 70dusterjohn] #2420901
12/19/17 01:00 PM
12/19/17 01:00 PM
Joined: Feb 2005
Posts: 14,199
PA.
pittsburghracer Online work
"Little"John
pittsburghracer  Online Work
"Little"John

Joined: Feb 2005
Posts: 14,199
PA.
BUMP!!!!!!!!!!!


1970 Duster
Edelbrock headed 408
6.143@110.85 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2420903
12/19/17 01:10 PM
12/19/17 01:10 PM
Joined: Jan 2004
Posts: 3,727
Central Missouri Fort Leonard...
mopar65 Offline
master
mopar65  Offline
master

Joined: Jan 2004
Posts: 3,727
Central Missouri Fort Leonard...
I would intrested in a set for my magnum 360


3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2420921
12/19/17 01:55 PM
12/19/17 01:55 PM
Joined: Jan 2008
Posts: 638
Rochester, PA (near Pittsburgh...
1
1974 474 Duster Offline
mopar
1974 474 Duster  Offline
mopar
1

Joined: Jan 2008
Posts: 638
Rochester, PA (near Pittsburgh...
I also need a set for -1 heads? What kind of price are you looking at for them
Ken Michalik

Re: Harland Sharp Rocker Sale Interest [Re: 1974 474 Duster] #2420986
12/19/17 04:06 PM
12/19/17 04:06 PM
Joined: May 2009
Posts: 755
Missouri
G
galen Offline
super stock
galen  Offline
super stock
G

Joined: May 2009
Posts: 755
Missouri
Todd I was getting ready to order a set of S70015KE or S70016KE for trick flow 270s. Also interested in a set of morel bushing lifters if they will work in a stock block. When you have a minute please pm me your phone number.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2421195
12/19/17 11:17 PM
12/19/17 11:17 PM
Joined: Jul 2004
Posts: 4,340
Worst Weather USA
493_DART Offline
master
493_DART  Offline
master

Joined: Jul 2004
Posts: 4,340
Worst Weather USA
price on a 1.6 set for BB ?

Re: Harland Sharp Rocker Sale Interest [Re: 493_DART] #2421361
12/20/17 10:49 AM
12/20/17 10:49 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Hey guys, I'll give it a few more days to soak in, and see where we are. Over 750 views, and about 8 or 9 interested, so its iffy at this point, but hang tight, lets see what happens.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2421397
12/20/17 12:27 PM
12/20/17 12:27 PM
Joined: Jan 2003
Posts: 3,540
Milford, OH
markz528 Offline
master
markz528  Offline
master

Joined: Jan 2003
Posts: 3,540
Milford, OH
Sounds like it may be prudent for me to go with the E style for my new Trickflow 270 heads. You can put me down.


67 Coronet 500 9.610 @ 139.20 mph
67 Coronet 500 (street car) 13.300 @ 101.75 mph
69 GTX (clone) - build in progress......
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2422398
12/22/17 06:33 PM
12/22/17 06:33 PM
Joined: Jun 2009
Posts: 848
ky
68roadrunner Offline
super stock
68roadrunner  Offline
super stock

Joined: Jun 2009
Posts: 848
ky
-1 heads

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2422553
12/23/17 02:24 AM
12/23/17 02:24 AM
Joined: Apr 2015
Posts: 9
Sydney Australia
S
sr440 Offline
member
sr440  Offline
member
S

Joined: Apr 2015
Posts: 9
Sydney Australia
I would be interested in a set to suit Victor heads

Re: Harland Sharp Rocker Sale Interest [Re: sr440] #2422636
12/23/17 01:22 PM
12/23/17 01:22 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
SALE WILL BE HAPPENING. Will get it all hammered out in between Christmas and New Years, and contact everyone. Thanks


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2422673
12/23/17 03:11 PM
12/23/17 03:11 PM
Joined: Jan 2007
Posts: 5,935
flint michigan
mopar dave Offline
master
mopar dave  Offline
master

Joined: Jan 2007
Posts: 5,935
flint michigan
HS will drill those for pushrod oiling if need be at no extra charge. Great company to deal with.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2422743
12/23/17 07:04 PM
12/23/17 07:04 PM
Joined: Jan 2003
Posts: 3,540
Milford, OH
markz528 Offline
master
markz528  Offline
master

Joined: Jan 2003
Posts: 3,540
Milford, OH
Originally Posted By CompWedgeEngines
SALE WILL BE HAPPENING. Will get it all hammered out in between Christmas and New Years, and contact everyone. Thanks


Awesome! Thank you very much!


67 Coronet 500 9.610 @ 139.20 mph
67 Coronet 500 (street car) 13.300 @ 101.75 mph
69 GTX (clone) - build in progress......
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2422818
12/23/17 09:31 PM
12/23/17 09:31 PM
Joined: Nov 2007
Posts: 24
ma.
R
roadrunner34 Offline
member
roadrunner34  Offline
member
R

Joined: Nov 2007
Posts: 24
ma.
A set of 1.6 for -1's.

Re: Harland Sharp Rocker Sale Interest [Re: roadrunner34] #2425155
12/28/17 11:50 PM
12/28/17 11:50 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
OK, folks, I'll be PM-ing everyone who has replied within a couple days. I will provide my email to send request to. I will only do orders that have been emailed, so please, send me a note after I PM you here. I will put specifics in an email once you contact me. Mods, you can send this over to DEALS section if you want. Thanks


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2425255
12/29/17 08:54 AM
12/29/17 08:54 AM
Joined: Jan 2003
Posts: 22,221
The frozen wasteland of Iowa
T
tboomer Offline

Too Many Posts
tboomer  Offline

Too Many Posts
T

Joined: Jan 2003
Posts: 22,221
The frozen wasteland of Iowa
Cool deal Todd! Thanks for giving our members a discount! I will move this thread at the end of the day to the Hot deals and new products section. wave

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2425464
12/29/17 06:58 PM
12/29/17 06:58 PM
Joined: Jul 2010
Posts: 566
COLUMBUS, OH
W
Whompin_Wedge Offline
mopar
Whompin_Wedge  Offline
mopar
W

Joined: Jul 2010
Posts: 566
COLUMBUS, OH
Can I just get a couple sets of shafts?

Or if not pricing on a set for B1 Originals?

Thanks!!

Casey FJ

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2425502
12/29/17 07:44 PM
12/29/17 07:44 PM
Joined: Feb 2012
Posts: 329
Ohio
M
moparjoe360.4 Offline
enthusiast
moparjoe360.4  Offline
enthusiast
M

Joined: Feb 2012
Posts: 329
Ohio
I’m interested in pricing on 1.5s for LA Small block. Thanks

Re: Harland Sharp Rocker Sale Interest [Re: moparjoe360.4] #2425509
12/29/17 07:59 PM
12/29/17 07:59 PM
Joined: Jun 2016
Posts: 107
Washington
H
hemienvy Offline
member
hemienvy  Offline
member
H

Joined: Jun 2016
Posts: 107
Washington
Would it be possible to order less than a complete setup ?
For example, just rocker shafts, or just intake rockers ?

Re: Harland Sharp Rocker Sale Interest [Re: hemienvy] #2425570
12/29/17 11:51 PM
12/29/17 11:51 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Yes you can, will send you a PM.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2425579
12/30/17 12:17 AM
12/30/17 12:17 AM
Joined: Feb 2005
Posts: 14,199
PA.
pittsburghracer Online work
"Little"John
pittsburghracer  Online Work
"Little"John

Joined: Feb 2005
Posts: 14,199
PA.
It might be a good time for some of our members to jump up their intake rocker ratio


1970 Duster
Edelbrock headed 408
6.143@110.85 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2425580
12/30/17 12:19 AM
12/30/17 12:19 AM
Joined: Jul 2005
Posts: 487
St Louis, MO, USA
S
srunge55 Offline
mopar
srunge55  Offline
mopar
S

Joined: Jul 2005
Posts: 487
St Louis, MO, USA
Damn! I just bought some from Mancini with a 10% discount.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2425604
12/30/17 01:53 AM
12/30/17 01:53 AM
Joined: Jul 2016
Posts: 45
California
S
slowfab Offline
member
slowfab  Offline
member
S

Joined: Jul 2016
Posts: 45
California
Interested in a set # S70015EVK

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2426068
12/30/17 10:21 PM
12/30/17 10:21 PM
Joined: Jan 2003
Posts: 19
Sweden
S
sbdemon Offline
member
sbdemon  Offline
member
S

Joined: Jan 2003
Posts: 19
Sweden
I am interested in a set of 1,6 ratio rockers for w5 heads.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2426312
12/31/17 02:23 PM
12/31/17 02:23 PM
Joined: Jan 2003
Posts: 248
Oahu, Hawaii
P
ParadiseCuda Offline
enthusiast
ParadiseCuda  Offline
enthusiast
P

Joined: Jan 2003
Posts: 248
Oahu, Hawaii
I would like a set for SB Edelbrock heads.

Re: Harland Sharp Rocker Sale Interest [Re: ParadiseCuda] #2426348
12/31/17 03:10 PM
12/31/17 03:10 PM
Joined: Jan 2003
Posts: 22,221
The frozen wasteland of Iowa
T
tboomer Offline

Too Many Posts
tboomer  Offline

Too Many Posts
T

Joined: Jan 2003
Posts: 22,221
The frozen wasteland of Iowa
Todd...You getting this done? wave

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2427234
01/01/18 05:04 PM
01/01/18 05:04 PM
Joined: Jul 2013
Posts: 28
Victoria, B.C.
P
Pat Mac Offline
member
Pat Mac  Offline
member
P

Joined: Jul 2013
Posts: 28
Victoria, B.C.
Hello,
I am interested in a set for source heads.
Thanks,Pat

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2429276
01/05/18 12:55 AM
01/05/18 12:55 AM
Joined: Oct 2016
Posts: 4
quebec
C
crazy 340 Offline
member
crazy 340  Offline
member
C

Joined: Oct 2016
Posts: 4
quebec
need price and a shiping quote for

1.6 ratio for my indy 360-1 heads

I know HS sale them but dont have a part number for them

need to bw ship to canada

thanks Bob

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2429279
01/05/18 01:12 AM
01/05/18 01:12 AM
Joined: Jan 2003
Posts: 22,221
The frozen wasteland of Iowa
T
tboomer Offline

Too Many Posts
tboomer  Offline

Too Many Posts
T

Joined: Jan 2003
Posts: 22,221
The frozen wasteland of Iowa
Anyone hear from Todd?

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2429326
01/05/18 03:47 AM
01/05/18 03:47 AM
Joined: Jan 2004
Posts: 6,445
Missouri
68KillerBee Offline
master
68KillerBee  Offline
master

Joined: Jan 2004
Posts: 6,445
Missouri
I'm upgrading my 400 based 470" stroker but needs camshaft and rockers. Have to be careful with my cam because I have the FiTech EFI on it, but I read I need to stay above 7-8" of vacuum and 110 degrees of LSA. Right now it's being held back by a comp cams XE274H and stock stamped steel rockers. I should have built it right originally and put in a bigger cam and good rockers. They are Stealth heads that were CNC ported by Modern Cylinder Head. 911-16 springs and 10 degree locks. 95% street driven car 4 speed car. Only take it to the Nationals and local track a couple times a year and race it.
I'm thinking about going to the XE285HL cam.
Would be interested in getting it all from you. PM me with a price please or a phone number if you want me to give you a call to discuss. Let me know what other info you may need so I have it all ready when I Call.
Here's my current cam:
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=708&sb=2
Thanks!

Re: Harland Sharp Rocker Sale Interest [Re: tboomer] #2429371
01/05/18 10:49 AM
01/05/18 10:49 AM
Joined: Jan 2003
Posts: 3,439
Northern N.J.
hemi_doug Offline
master
hemi_doug  Offline
master

Joined: Jan 2003
Posts: 3,439
Northern N.J.
Originally Posted By tboomer
Anyone hear from Todd?


Responded to his PM, haven't heard back yet.



71 440-6 4spd & 69 Hemi 4spd
Re: Harland Sharp Rocker Sale Interest [Re: tboomer] #2429373
01/05/18 10:53 AM
01/05/18 10:53 AM
Joined: Sep 2017
Posts: 39
Kentucky
3
301v Offline
member
301v  Offline
member
3

Joined: Sep 2017
Posts: 39
Kentucky
Originally Posted By tboomer
Anyone hear from Todd?


Nope same hear.. Responded to his email but nothing.

I was in kinda of a hurry to get this motor back together and back in the car this month to have it all ready before the big buck races start back in March so i just went ahead and ordered another set of T&Ds from Indy.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2430891
01/08/18 02:16 AM
01/08/18 02:16 AM
Joined: Feb 2012
Posts: 329
Ohio
M
moparjoe360.4 Offline
enthusiast
moparjoe360.4  Offline
enthusiast
M

Joined: Feb 2012
Posts: 329
Ohio
I got an email with a quote from him earlier today and I think I’ll be pullin the trigger on the deal.

Re: Harland Sharp Rocker Sale Interest [Re: moparjoe360.4] #2430959
01/08/18 11:17 AM
01/08/18 11:17 AM
Joined: Sep 2017
Posts: 39
Kentucky
3
301v Offline
member
301v  Offline
member
3

Joined: Sep 2017
Posts: 39
Kentucky
Got my quote last night but as i already stated i had to get some already.

If anyone is wandering he does have a really good deal going on.

Re: Harland Sharp Rocker Sale Interest [Re: 301v] #2430972
01/08/18 11:44 AM
01/08/18 11:44 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Guys, sorry for the delay in responses. The weather here has been brutal, as in many areas, and between that and the Holidays and lots of shop work, I am just behind.I dont need to plow anymore snow either!

I emailed everyone last night that had sent me an email, and I think I got everyone. If you didnt send an email, then I wouldnt have sent you a price. I think I may have one I sent thru Moparts, but thats it. Email is what I need to communicate on, to keep it all in one place. There are many questions in a lot of these requests, so its not simply sending a price.

Ted, I will get back to you later today, and you can add it to DEALS. Thanks for your patience folks, as I mentioned before, its just me, so things can get a little boggged down at times. Stay warm!


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: slowfab] #2430975
01/08/18 11:47 AM
01/08/18 11:47 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Originally Posted By slowfab
Interested in a set # S70015EVK



SLOW, not sure if you emailed me ???


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: crazy 340] #2430976
01/08/18 11:47 AM
01/08/18 11:47 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Originally Posted By crazy 340
need price and a shiping quote for

1.6 ratio for my indy 360-1 heads

I know HS sale them but dont have a part number for them

need to bw ship to canada

thanks Bob


Crazy,

Not sure if you emailed me?


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: Pat Mac] #2430978
01/08/18 11:48 AM
01/08/18 11:48 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Originally Posted By Pat Mac
Hello,
I am interested in a set for source heads.
Thanks,Pat


Pat,

Not sure if you emailed me?


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2430981
01/08/18 11:51 AM
01/08/18 11:51 AM
Joined: Jan 2003
Posts: 3,439
Northern N.J.
hemi_doug Offline
master
hemi_doug  Offline
master

Joined: Jan 2003
Posts: 3,439
Northern N.J.
Me too...got my quote in an email yesterday.



71 440-6 4spd & 69 Hemi 4spd
Re: Harland Sharp Rocker Sale Interest [Re: 68KillerBee] #2431859
01/09/18 10:13 PM
01/09/18 10:13 PM
Joined: Jan 2004
Posts: 6,445
Missouri
68KillerBee Offline
master
68KillerBee  Offline
master

Joined: Jan 2004
Posts: 6,445
Missouri
Your PM box is full. Can't get to you, so I used email in your profile
Thanks
Devin

Originally Posted By 68KillerBee
I'm upgrading my 400 based 470" stroker but needs camshaft and rockers. Have to be careful with my cam because I have the FiTech EFI on it, but I read I need to stay above 7-8" of vacuum and 110 degrees of LSA. Right now it's being held back by a comp cams XE274H and stock stamped steel rockers. I should have built it right originally and put in a bigger cam and good rockers. They are Stealth heads that were CNC ported by Modern Cylinder Head. 911-16 springs and 10 degree locks. 95% street driven car 4 speed car. Only take it to the Nationals and local track a couple times a year and race it.
I'm thinking about going to the XE285HL cam.
Would be interested in getting it all from you. PM me with a price please or a phone number if you want me to give you a call to discuss. Let me know what other info you may need so I have it all ready when I Call.
Here's my current cam:
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=708&sb=2
Thanks!

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2432488
01/10/18 10:31 PM
01/10/18 10:31 PM
Joined: Nov 2007
Posts: 24
ma.
R
roadrunner34 Offline
member
roadrunner34  Offline
member
R

Joined: Nov 2007
Posts: 24
ma.
Haven't heard anything back yet.

Re: Harland Sharp Rocker Sale Interest [Re: roadrunner34] #2432648
01/11/18 02:58 AM
01/11/18 02:58 AM
Joined: Jan 2004
Posts: 6,445
Missouri
68KillerBee Offline
master
68KillerBee  Offline
master

Joined: Jan 2004
Posts: 6,445
Missouri
Originally Posted By roadrunner34
Haven't heard anything back yet.


I sent an email to the email attached to his profile. Heard back today. Going to call him Friday to see about getting a cam and other top end stuff from him. We'll see what my piggy bank allows, but know the rockers are going to help me out a ton.

Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2434263
01/14/18 03:42 AM
01/14/18 03:42 AM
Joined: Feb 2012
Posts: 329
Ohio
M
moparjoe360.4 Offline
enthusiast
moparjoe360.4  Offline
enthusiast
M

Joined: Feb 2012
Posts: 329
Ohio
Any one hear from Todd? Got an email from him Wednesday that asked for my phone number and said he’d call me Friday, but I never got the call. I’m guessing he got busy or the weather that came through screwed up his plans. I just want to make sure my rockers get ordered before the dead line.

Re: Harland Sharp Rocker Sale Interest [Re: moparjoe360.4] #2434771
01/15/18 12:49 AM
01/15/18 12:49 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
weather killed us, I sent you an email. We're back to " normal" whatever that is......lol.... Flooding was bad.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2434775
01/15/18 12:56 AM
01/15/18 12:56 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Because of the delays with weather and also lot of emails to answer, I'm going to extend this for another week, so drop dead date will be next Monday the 22nd, for ordering.I'm sending a mod a note to send this over to the DEALS section to finish it from there.Everyone should have had an answer by now, pricing etc. I still have 2 people to call back yet. Thanks to all.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2435504
01/16/18 10:47 AM
01/16/18 10:47 AM
Joined: Jan 2003
Posts: 2,664
Shelby Twp. Mi
HardcoreB Offline
master
HardcoreB  Offline
master

Joined: Jan 2003
Posts: 2,664
Shelby Twp. Mi
I emailed you as well Todd. No response yet.

Re: Harland Sharp Rocker Sale Interest [Re: HardcoreB] #2435630
01/16/18 02:05 PM
01/16/18 02:05 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
I'll check, caught up everyone last night I think, havent done any today yet.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2435706
01/16/18 03:46 PM
01/16/18 03:46 PM
Joined: Jun 2009
Posts: 11
louisiana USA
H
hotrodman Offline
member
hotrodman  Offline
member
H

Joined: Jun 2009
Posts: 11
louisiana USA
Need a deal on some shafts and hold downs . Thanks

Re: Harland Sharp Rocker Sale Interest [Re: hotrodman] #2437526
01/19/18 03:58 PM
01/19/18 03:58 PM
Joined: Jan 2003
Posts: 2,664
Shelby Twp. Mi
HardcoreB Offline
master
HardcoreB  Offline
master

Joined: Jan 2003
Posts: 2,664
Shelby Twp. Mi
no reply on my end yet...ill send email again...price on Indy SR "kit" both 1.5 and 1.6 prices with holddowns..Thanks

Re: Harland Sharp Rocker Sale Interest [Re: HardcoreB] #2439251
01/22/18 11:09 PM
01/22/18 11:09 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
OK guys, I think I got all of you covered. I spent a LOT of time getting back to people, and unfortunately,I had many verbally commit, but not pay or back out , so I'm going to handle the ones that did, and I will wait until Tuesday to end the sale just in case I missed anyone. I apologize if so. Handling the orders is easy, but many asked a lot of other questions, and it just isnt something I am geared up well for by myself. Thank you Moparts, and to all that ordered.All orders will ship direct from Harland Sharp, in the order they were paid. Again, best way to reach me is still email.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines] #2439610
01/23/18 04:35 PM
01/23/18 04:35 PM
Joined: Jan 2004
Posts: 6,445
Missouri
68KillerBee Offline
master
68KillerBee  Offline
master

Joined: Jan 2004
Posts: 6,445
Missouri
Originally Posted By CompWedgeEngines
OK guys, I think I got all of you covered. I spent a LOT of time getting back to people, and unfortunately,I had many verbally commit, but not pay or back out , so I'm going to handle the ones that did, and I will wait until Tuesday to end the sale just in case I missed anyone. I apologize if so. Handling the orders is easy, but many asked a lot of other questions, and it just isnt something I am geared up well for by myself. Thank you Moparts, and to all that ordered.All orders will ship direct from Harland Sharp, in the order they were paid. Again, best way to reach me is still email.


Shot you an email back. I'll just get the rockers and we can discuss cam and other stuff in a few weeks. I'll probably just paypal the money if I don't hear from you since you've already sent me a quote. I'm sure between doing this for us and running your own business keeps you really busy! Appreciate it.

Re: Harland Sharp Rocker Sale Interest [Re: 68KillerBee] #2440011
01/24/18 02:02 PM
01/24/18 02:02 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Sale is finished. Only a couple custom or single odd ball type pieces and requests are being handled now. Some may start to ship this week, I am getting updated by Friday. I know shafts are the hold up for some right now, and are in heat treat and expected by Friday or Monday .

Thank you to everyone who purchased and was patient. it took much more time than I had planned, do to many many extra questions along with the orders and the wrath earlier of good ole Mother Nature.

Thank you Moparts for the platform.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest [Re: hotrodman] #2440201
01/24/18 08:05 PM
01/24/18 08:05 PM
Joined: Jun 2009
Posts: 11
louisiana USA
H
hotrodman Offline
member
hotrodman  Offline
member
H

Joined: Jun 2009
Posts: 11
louisiana USA
didn't get no reply

Re: Harland Sharp Rocker Sale Interest [Re: hotrodman] #2440240
01/24/18 09:39 PM
01/24/18 09:39 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Either email me back, or let me know what your email name is, or date of it and I will look. Its possible I missed you. I will still cover you if thats the case.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: CompWedgeEngines] #2442849
01/29/18 01:33 PM
01/29/18 01:33 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
Hey folks, just received an update from Harland Sharp. They are expecting rocker shafts back from grinding/heat treating by Wednesday of this week. We were hoping for today, but a couple days late it appears. They are hoping to have all kits shipped by Friday. I will post any updates here as I get them. Thank You.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: CompWedgeEngines] #2444264
01/31/18 10:00 PM
01/31/18 10:00 PM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
OK guys, a bunch of orders shipped today, more to follow next couple of days. I'll be updating anything that may be delayed over the next day or two thru emails. Thank You


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: CompWedgeEngines] #2445283
02/02/18 05:44 PM
02/02/18 05:44 PM
Joined: Jan 2003
Posts: 3,439
Northern N.J.
hemi_doug Offline
master
hemi_doug  Offline
master

Joined: Jan 2003
Posts: 3,439
Northern N.J.
Hi Todd, received my rockers today, thank you very much for your efforts. I ordered the stud hardware too but haven't received it with the package. Will that come from you or HS? I tried to PM you but your box is full. Thanks again!



71 440-6 4spd & 69 Hemi 4spd
Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: hemi_doug] #2446193
02/04/18 01:51 PM
02/04/18 01:51 PM
Joined: Jan 2008
Posts: 638
Rochester, PA (near Pittsburgh...
1
1974 474 Duster Offline
mopar
1974 474 Duster  Offline
mopar
1

Joined: Jan 2008
Posts: 638
Rochester, PA (near Pittsburgh...
Special Thank you to Todd from Competition Wedge!! Thanks for all the hard work to get us our parts at a great price. Hard to get everyone together at the same time, but it seems to work out for him.
Thanks again, Ken Michalik

Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: CompWedgeEngines] #2446593
02/05/18 12:06 AM
02/05/18 12:06 AM
Joined: Feb 2012
Posts: 329
Ohio
M
moparjoe360.4 Offline
enthusiast
moparjoe360.4  Offline
enthusiast
M

Joined: Feb 2012
Posts: 329
Ohio
I agree, Thanks again for the great deal Todd!

Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: moparjoe360.4] #2446893
02/05/18 03:32 PM
02/05/18 03:32 PM
Joined: May 2009
Posts: 755
Missouri
G
galen Offline
super stock
galen  Offline
super stock
G

Joined: May 2009
Posts: 755
Missouri
Got mine Friday. Thanks Todd. very much appreciated.

Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: galen] #2450551
02/12/18 08:21 AM
02/12/18 08:21 AM
Joined: Jul 2003
Posts: 4,924
upstate western ny
sogtx Offline
master
sogtx  Offline
master

Joined: Jul 2003
Posts: 4,924
upstate western ny
Todd
Did I make it ?

Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: CompWedgeEngines] #2456858
02/24/18 06:58 PM
02/24/18 06:58 PM
Joined: Jan 2004
Posts: 6,445
Missouri
68KillerBee Offline
master
68KillerBee  Offline
master

Joined: Jan 2004
Posts: 6,445
Missouri
Anybody else still waiting?

Re: Harland Sharp Rocker Sale Interest UPDATE 01/29/18 [Re: 68KillerBee] #2457640
02/26/18 12:14 AM
02/26/18 12:14 AM
Joined: Nov 2004
Posts: 3,483
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,483
Syracuse,NY
I havent checked here in a bit. I heard the other day from a guy in Hawaii, but he was the only one who hadnt seen his yet, and I only suspect that was from the geographical nature of his location.

Let me check on yours, I have not been made aware of anything that DIDNT ship weeks ago. Please send me a email if you havent already. I have not checked email this weekend yet. Thanks Todd


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Page 1 of 4 1 2 3 4

Advertisement
Forum Statistics
Forums32
Topics194,451
Posts2,270,912
Members25,842
Most Online1,424
Jun 20th, 2018
Moparts Newest Topics
1971 Challenger R/T 383 Holley Choke ??
by kidmopar. 04/21/19 09:46 PM
shifter neutral switch wire
by dragon. 04/21/19 09:40 PM
440 source aluminum heads?
by bobs69. 04/21/19 08:45 PM
Good exhaust manifolds vs stainless headers
by 71TA. 04/21/19 07:50 PM

Powered by UBB.threads™ PHP Forum Software 7.7.1