Thanks for sharing that inforamtion
My current bracket motor is similar, 4.35 bore with 4.25 stroke, 6.700 RPM BB Chevy type H beam steel rods with Diamond custom pistons with around 14.0 to one now with a set of Victor Max Wedge heads on E85. Early cold weather 400 block from AndyF (Many Thanks
) with 440 Source aluminum main caps and studs, hopefully it won't end up looking like yours
Not filled either
Did it fail during run? If so I hope nobody and nothing else got hurt
I have broke parts on a run and thought I was going to bend up some sheet metal several times, thanks to God I didn't get hurt or bend the cars