who has 440-1 rocker arm stud kits? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech who has 440-1 rocker arm stud kits?

Print Thread

who has 440-1 rocker arm stud kits? #2359491 08/25/17 07:56 AM 08/25/17 07:56 AM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	as the title says. i'm wanting a complete kit if possible. new heads, new hardware.

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2359599 08/25/17 12:45 PM 08/25/17 12:45 PM
Joined: Jan 2008 Posts: 2,363 Cotati, CA Dave Hall top fuel
Dave Hall top fuel Joined: Jan 2008 Posts: 2,363 Cotati, CA	Uh, Indy Cyl. Head? ARP?

Re: who has 440-1 rocker arm stud kits? [Re: Dave Hall] #2359606 08/25/17 12:56 PM 08/25/17 12:56 PM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	ICH (can't remember the part # at the moment), but the last kit I bought didn't have the threaded sections on the studs machined consistently. If you can get the comparable lengths in ARP, you'll probably be better off, but I don't know of anyone who sells them in kit form, and can't say how much $$$ it'll cost, either.

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2359608 08/25/17 01:00 PM 08/25/17 01:00 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	Check your messages. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: who has 440-1 rocker arm stud kits? [Re: CompWedgeEngines] #2359611 08/25/17 01:08 PM 08/25/17 01:08 PM
Joined: Feb 2005 Posts: 20,185 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,185 PA.	Originally Posted By CompWedgeEngines Check your messages. Todd your message box is FULL. Do some housecleaning. LOL 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2359613 08/25/17 01:10 PM 08/25/17 01:10 PM
Joined: Jan 2003 Posts: 2,299 NE Ohio DoubleD top fuel
DoubleD top fuel Joined: Jan 2003 Posts: 2,299 NE Ohio	I posted this awhile back - I used these on a set of INDY EZ-1 heads You can order ARP stuff and make your own kit - these are Summit part numbers - I just used these for my HS rockers ARP-200-8556 WASHER 10-PC comes in a package ARP-300-8332 12 PT NUTS 10PC comes in a package ARP-AJ2500-1B STUD 3/8 X 2.500 – you need 6 of these ARP-AJ3250-1B SHAFT STUD – 3/8 x 3.25 you need 4 of these

Re: who has 440-1 rocker arm stud kits? [Re: DoubleD] #2359709 08/25/17 03:54 PM 08/25/17 03:54 PM
Joined: Mar 2008 Posts: 860 lancaster,california johnnycuda super stock
johnnycuda super stock Joined: Mar 2008 Posts: 860 lancaster,california	I used these on my SR heads, seems fine so far, thanks for posting those back then by the way! Originally Posted By DoubleD I posted this awhile back - I used these on a set of INDY EZ-1 heads You can order ARP stuff and make your own kit - these are Summit part numbers - I just used these for my HS rockers ARP-200-8556 WASHER 10-PC comes in a package ARP-300-8332 12 PT NUTS 10PC comes in a package ARP-AJ2500-1B STUD 3/8 X 2.500 – you need 6 of these ARP-AJ3250-1B SHAFT STUD – 3/8 x 3.25 you need 4 of these 1970 'Cuda,Lime Light,499 Indy S/R's 10.70's @125,street driven ALOT! 1966 Barracuda 360,now a 5spd,Hemi Orange,Hot Rod Air, New daily driver-2003 Ram 2500 Cummins 5.9 '69 Valiant 2-dr, sleeper! New project---1938 Dodge truck, plan is a 360 with a A500, AC, Calvert rear susp., rack and pinion front with coils.

Re: who has 440-1 rocker arm stud kits? [Re: pittsburghracer] #2359734 08/25/17 04:31 PM 08/25/17 04:31 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	I had no idea...getting the broom out! I just looked , it has like 27 pages of old messages in there.....like they all re-loaded....there are 12 year old notes from Monte Smith in there..geesh... Last edited by CompWedgeEngines; 08/25/17 04:36 PM. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2359814 08/25/17 07:01 PM 08/25/17 07:01 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	The last kit i bought was an ICH kit but youre right, they're not the flashest kit avail & i see ARP don't list this as a kit. When you buy them individually do they come with the allen key hex drive to install them?

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2359873 08/25/17 09:03 PM 08/25/17 09:03 PM
Joined: Jan 2003 Posts: 31,050 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,050 Oregon	Originally Posted By rebel The last kit i bought was an ICH kit but youre right, they're not the flashest kit avail & i see ARP don't list this as a kit. When you buy them individually do they come with the allen key hex drive to install them? The B in the ARP part number stands for Broached.

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2359979 08/26/17 12:41 AM 08/26/17 12:41 AM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	while we're on the subject of Stud Kits, anyone know the difference between the ARP Head Stud Kit & the Milodon? there's near on $50 difference in price, convert that to my $ & thats near $80, a lot of extra coin to pay if theres buggar all difference. Last edited by rebel; 08/26/17 12:54 AM.

Re: who has 440-1 rocker arm stud kits? [Re: rebel] #2360116 08/26/17 01:09 PM 08/26/17 01:09 PM
Joined: Apr 2014 Posts: 39 Florida R rpagan member
rpagan member R Joined: Apr 2014 Posts: 39 Florida	I used Milodon head studs on one engine trying to save my customer some money. Broke one stud on installation. They told me they had a bad run and sent me 3 new ones (sbc) as they didn't know which I needed. Good thing they sent 3 as on first warm up a second stud broke. Replaced that stud and the engine was raced a full season. Upon tear down a third stud broke!!! NEVER AGAIN. I use nothing but ARP studs in my customers builds from then on.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1